schocks

[tunedin302]

I have talked with eibach before, as well as my suspension/ chassis engineer buddy who agrees. good point on H&R, Bilstien... I wonder if they suggest springs to use with there setup...?

MM suggests using H&R or Hypercoils with the bilsteins. They seem to know their stuff.

 

[bryce93lx]

+1 for maximum motorsports, stay away from kyb they barley pass as a stock replacment not nearly enough dampening on a lowered car, i have a mm coil over kit with bilstiens and love it, but it was pricey(1600), i also have heard that the bullit kit really does not work on a fox

 

[Shakerhood]

Does the bullit setup even lower the fox cars? I have heard some bad things about the tolerances of that kit being way off.

It depends where you purchase the parts from as sometimes parts are mixed and matched and you could end up with 01 Cobra or 03/04 Mach 1 parts mixed in. I have the Actual 01 Bullitt Parts on my GT and it worked out Fantastic, it lowered the Front about 7/8" and out back around 3/4", the ride and handling are superior compared to stock!

 

[Kerpal]

Anybody use the Bilstein set up on there daily driver?

I have the Bilstein HD's and they ride awesome... I'm on stock springs trimmed 1 coil in the front (about 1.5" lower and stiffer than stock). According to Maximum Motorsports the Bilsteins are compatible with anything from stock springs to a high rate lowering spring.