Going to Summit What To Buy?!?

onefstsnake

New Member
Nov 25, 2005
792
1
0
Northern VA
Well my Dad and I decided to take a trip to Ohio this weekend. And I see there is a Summit Racing store up there...

Anyways since my 21st birthday is this month he said I could pick out a couple things.

So what should I get?

Maybe an intake? 5lug for the rear? Too many damn parts to choose from...

Here is the mod list. http://www.excessivemotorsports.net/?action=ken

or

Engine:
-Stock 302
-C&L 76mm MAF
-MAC 1 3/4" Shorty Headers (ceramic)
-MAC O/R H Pipe
-Flowmaster 2 Chamber CatBack

Drivetrain:
-Stock World Class T5 Trans
-Steeda TriAx shifter
-FRP Aluminum Driveshaft
-Moser 31 Spline Axles
-Auburn Pro Locker
-FRP 3.73 gears

Electronics:
-MSD 6AL
-MSD SS Coil
-FRP 9mm Wires
-MSD Cap/Rotor
-AutoMeter Gauges

Suspension and Chassis:
-Excessive Motorsports Subframe Connectors
-Steeda Sport Springs
-Tokico Shocks
-Maximum Motorsports CC Plates
-99 GT Front Brakes
-Stailness Steel Brake Lines
-Hawk HPS Pads
-ARP Wheel Studs Wheels and Tires:
-Weld Pro Stars w. 185/65/15 tires
-Pony Wheels w. 255/50/16 Mickey Thompson ET Streets

Interior and Exterior:
-Corbeau A4 Racing Seats
-Corbeau Racing Harness
-CCP Gauge Plate and Radio Pannel
-50Resto Clear Headlight Kit
-Kaneen 3" Cowl Hood
 
  • Sponsors (?)


yeah I was looking at heads, but Id like to get some AFR 185's.

But when I do heads I will need alot more than the heads...
Pushrods, Rockers, valve covers and a camshaft.
So heads will go on the new motor im building.


Which intake and TB?

I really like the look of the black TrickFlow intakes.
But alot of people seem to like the Cobra intake...
 
check out the clearance table over there!!!!! I've seen sooo much stuff for CHEAP!

i also just loooooove walking around that place. They've got like every part possible you can walk around and touch.
 
i have a 75 mm ! As seen in pic #1 and trailer hitch.. as seen in pic#2!
StevesCARPIX4.jpg


StevesCARPIX6.jpg
 

Attachments

  • StevesCARPIX4.jpg
    StevesCARPIX4.jpg
    68.3 KB · Views: 60
  • StevesCARPIX6.jpg
    StevesCARPIX6.jpg
    58.7 KB · Views: 65
95conv5.0 said:
it doesnt matter what size he gets, theres people using 75-90mm on stock shortblock cars and they run just fine and have plenty of bottom end!

i didn't say you couldn't run a larger tb on a stock shortblock, but what does the shortblock to do with the fact that he has stock heads, cam, and intake?

i can imagine the throtle responce with a 90mm tb and stock longblock:rolleyes: , what intake are they using that comes with a 90mm plenum? (TF box-r?) and what heads?... probaly not e7's
 
onefstsnake said:
yeah I was looking at heads, but Id like to get some AFR 185's.

But when I do heads I will need alot more than the heads...
Pushrods, Rockers, valve covers and a camshaft.
So heads will go on the new motor im building.


Which intake and TB?

I really like the look of the black TrickFlow intakes.
But alot of people seem to like the Cobra intake...
Why does it seem like valve springs are so overlooked? :rolleyes:
 
its my first fast car test drove it,.. had it side ways in 3rd gear! im not a sissy i just now where to draw the line.. my life sucks but i dont want to DIE!

lol im not gonna argue over whos hitch is sWeeter lol cuz mine is way better then that uhaul hauler! .lol