does it matter where my msd box is mounted ?details inside

[mr5o]

i was wondering if it mattered where my msd box was located reason i ask is im trying to clean out my engine bay and thought of mounting it in the fender well but dont want it near any weather or dirt .so is it possible to mount my msd where my glove box would be ? does it need a good air flow or do the wires have to be a certain lenght or shorter to maintain good electrical signal..hope this isnt to confusing guess im asking if the msd is mounted in the car is it to far away to perform properly

 

[MeanMussy]

You can lengthen the wires, but you have to use a larger gage wire than the one you're trying to lengthen.

I've been debating this myself. I want to mount it in the car. I have it under the passenger seat right now, but I haven't wired it. I'm looking for a way to route the wires to avoid any interference from the stereo.

 

[mr5o]

a guy on the gtamc (greater toronto area mustang club) said the same thing as you even the radio thing is there any secrets to keeping the radio interferance at bay

 

[Kevins89notch5.0]

Mine is in my glove box.

 

[86bluecobra]

I have seen many mustangs with the ignition box mounted in the car. Yes it does stay as cool but so far they don't seem to be having any issues. I have the digital 6 box and if thats what you have it is important to be able to get at it because you can set rev limitors and timing retards on the box itself. keep that in mind.

 

[1Bad88notch]

I have mine mounted inside on the passenger side tranny tunnel dont have no interference with radio but i cant hear my radio because my exhaust is so loud. haha!

 

[88Stang331]

As with almost all electronic devices, the cooler you can keep it the better and longer it will last. So keep it away from the firewall and the headers. I believe there are a few people on here that have it tucked in the fenderwell.

 

[7-UP BILL]

In the D/S fenderwell attached to the side frame rail. wires exit where the washer bottle is