Just ordered my parts!! How much gains will I see after install?

[sipynsyrup]

My current mods on my 94 gt vert 5spd:
3.73 gears
bbk adj fuel pressure regulator
3.5" cai w/ k&n
bbk 70MM TB
MSD 6a ignition
control arms, camber plates, eibach sway bars and lowering springs
pro50 short throw
FULL mac exhaust(high flow cats installed for emissions)

NOW for what I ordered:
TFS top end kit. ($2200) http://store.summitracing.com/partdetail.asp?part=TFS%2DK514%2D350%2D370&autoview=sku
80mm MAF


I need to buy injectors right?? What size should I get?? 24lb 30lb or 40lb?? I plan on running FI in 2 or 3 years(probably a s/c, or nitrous)

I am going to get the car tuned at Houston Performance. What gains will I see??

I am thinkin about buying a zex nitrous kit if I feel it isn't enough.

 

[Danman765432]

You should go with 24lb injectors...when you do forced induction you will need to up these again...but the TFS top end kit has been proven to produce around 300rwhp.

 

[lager94GT]

I agree. At this point, go with the 24lbers

 

[sage2k]

wow im getting the TF kit too so we will have dang near the same exact setup (i have a vert too)
im getting a 75mm T-body
i'll have full mac exhaust (longtubes + prochamber + mac pro dumps)
3.73's
aluminum flywheel
TF kit
Cai
asp pulleys
using a tweecer to tune.

a few other things you might need to buy.
fuel pump (120$, might as well get a 255lh pump since you going FI in future)
oil fill cap for the trickflow valve covers (20$ on summit)
intake elbow (90$)
probably need an intake spacer (45-60$)