Tell me about the CS....

[Radman]

I have a 2007 GT/CS While I enjoy the 18"wheels, parchment interior, and blackout stripe, I am not that to enamored with the hood scoop.

The hood scoop is bolted on. Is there a big hole under that baby or can I just unbolt it and move on?

Also, the side scoops are 2x taped on right? Will I hurt anything just yanking them off?

Rad

 

[bigcat]

i believe that the hood scoop will have holes where it is bolted down. the side scoops are more than likely douled sided taped on to the quarters.

i have never looked at the car in person so i cant tell you 100%.

 

[lightblade]

yes the hood scoope will definetly leave holes from the bolts, i think the side scoops look sharp btw and i love the rear bumper

 

[Radman]

yes the hood scoope will definetly leave holes from the bolts, i think the side scoops look sharp btw and i love the rear bumper

Rear and front fascia will stay...Side scopes need to be functional.....

 

[cowtown]

You could go for a shaker package and that would (likely) take care of the holes.

 

[anthony05gt]

Rear and front fascia will stay...Side scopes need to be functional.....

I know somebody that might be interested in the side scoops if you take them off. PM me if you do.

 

[svarvel1]

The hood scoop has something like 12 holes in the hood and the side scoops each have 2 holes in the side plus double sided tape.

 

[6773]

the side scoops each have 2 holes in the side plus double sided tape.

Geez I hope that's correct. I can't believe the side scoops are only held on by tape.
BTW, the hood scoop is not part of the CS package...You paid extra for that.

 

[svarvel1]

I have an 06 GT and I added the hood scoop and the side scoops. Each come with instructions and templates for drilling On the side scoops you have 2 clips that snap into the side of the quarter panel as well as double sided tape. The hood scoop I believe has 8 clips and 4 bolts.

 

[stanmckinney]

The hood scoop is part of the GT appearance package, not the CS package.

 

[highvolts]

You could go for a shaker package and that would (likely) take care of the holes.

I don't think so. I have heard that the Shaker system will not cover the holes.

-Jason

 

[ShowYa06]

Everything from Ford has holes, sorry.

 

[dly]

Perhaps you needed to just buy a Regular Mustang GT then added the Front and Rear CS pieces. The CS has a certain style that you like or dislike but never buy something just to take items off you don't like, work the other way around.

dly 07 Black GT/CS

 

[cowtown]

I don't think so. I have heard that the Shaker system will not cover the holes.

-Jason

Well it'd be pretty easy to find out. you could drop the hood liner and see where the bolts and holes are. I would be surprised if they didn't because when I saw the scoope at the auto show recently it didn't seem any larger than a shaker, especially when the trim ring is taken into account. Could certainly be wrong though. May be worth an E-mail to CDC to find out.

 

[AlloyGT]

Well it'd be pretty easy to find out. you could drop the hood liner and see where the bolts and holes are. I would be surprised if they didn't because when I saw the scoope at the auto show recently it didn't seem any larger than a shaker, especially when the trim ring is taken into account. Could certainly be wrong though. May be worth an E-mail to CDC to find out.

You don't even need to drop the hood liner...just open the hood. There are seven bolts, coming right through the liner. My scoop looks a lot bigger than the shaker scoop, so I don't believe getting the shaker will do you much good...the holes would still need to be filled.