Where to mount line lock switch??

[afterglow]

Where do you guys mount your line lock switch?? I have a 69 Mach 1, stock automatic shifter, no console (although I do have a humphugger). Where should I mount my line lock switch??

I could mount it on the console but then it doesn't become removable anymore. Any suggestions???

 

[iskwezm]

i have mine mouted to my turn signal switch,easy to reach with a finger and still hold the wheel with both hands

 

[MustangMatt1966]

i have the shift knob with the line lock switch on it...it works great

View attachment 390731

 

[BullittStangV8]

Which line lock's did you guys go with?

 

[shhak]

I just had a SLP line lock installed on my 03 cobra. They put a switch down next to my 12v power outlet by the shifter. The switch just activates the actual line lock control. The actual control is the "flash to pass" switch (pulling the turn signal lever towards you holds the breaks) when the switch by the 12v power outlet is turned off, the "flash to pass" works like it's supposed to.

 

[afterglow]

i have mine mouted to my turn signal switch,easy to reach with a finger and still hold the wheel with both hands

This might be the way to go. Any pics??

 

[afterglow]

Another option I was toying around with is to replace just the handle of my (stock) setup with something from Hurst or B&M that has a button. Something like this:
View attachment 390675
or
View attachment 390676

Will this work?? Would anybody know what size thread the stock handle uses?? Or do I need to get my butt over to the shop and check it for myself??

 

[tylerrocks]

I just had a SLP line lock installed on my 03 cobra. They put a switch down next to my 12v power outlet by the shifter. The switch just activates the actual line lock control. The actual control is the "flash to pass" switch (pulling the turn signal lever towards you holds the breaks) when the switch by the 12v power outlet is turned off, the "flash to pass" works like it's supposed to.

Thats friggen awesome. Terminators rule.

 

[classic boost]

i put mine on a dimmer switch, a few inches away from the stock one on the floor board.

 

[shhak]

i put mine on a dimmer switch, a few inches away from the stock one on the floor board.

That's another good idea. I had mine done the way I did because I didn't want the inside of my car looking like a race car. Trying to keep it as stock looking as possible.

 

[iskwezm]

This might be the way to go. Any pics??

I'll try to get some for ya.Its wired with my 2 step, so it hold the brakes and the rev limiter at about 4500 for nice launch