Identify this Roush supercharger!!!

[HeyLittleCobra]

I bought a 97 GT and the guy gave me this Roush supercharger with it. He had no idea what it fit. Can anyone identify it for me? I don't have any part numbers. All I have are these pics.

I have more pics on request

 

[san~man]

I'll leave this open as long as there is no discussion about selling it on the forum. I don't mind people helping you find out what make/model it is, but there will be no selling on the forums.

Once it turns into that, your post will be locked and you'll be on vacation.

 

[BLK_ROUSH]

Same unit by SVO/FRPP .... roots blower for the 96-98 SOHC 2Vs.

 

[SilverBullet00]

is there a part number on it? It looks like the FRPP roots style blower...

like stated it should fit 96-98s with NPI heads, but they also make one for PI heads.

 

[DropTopPony]

That came on the stage 3 roush in like 98 maybe 97 too...Smoke would know better or err BLK ROUSH,

Did they include anything else with it or just that main unit? You need an install kit to put it on your car which includes relocation brackets/hardware/hoses etc etc...will cost you @$1100 from Ford for the kit.

 

[invertmast]

thats the stage 3 roush blower. Its the EXACT same blower as the FRPP/SVO unit that ford sells. only difference is it has roush on it. And like Droptop said, you'll need an installation kit to install it.

 

[Nater]

I've seen that same style on F150 4.6L's.

 

[invertmast]

I've seen that same style on F150 4.6L's.

not stock production F150's you haven't...

the truck 4.6L 2v intakes look somewhat similar to that supercharger. but are very far from similar.

 

[HeyLittleCobra]

Anyone have any idea what the boost numbers are for this unit? Or what kinda HP gains can be made? Also, is there anywhere I can access this info? I looked on Roushperformance.com and I found nothing for 96 to 98's. Is the install very difficult? Is there much to buy to make it happen? Thanks for all the help!!!

 

[justinschmidt1]

you want to sell that to a slow npi 4.6 like me?...haha..seriously how much you want for it?

I saw one on ebay the other day for like 200 bucks...there doesnt seem to be a large market for them..but id take it.

 

[invertmast]

Anyone have any idea what the boost numbers are for this unit? Or what kinda HP gains can be made? Also, is there anywhere I can access this info? I looked on Roushperformance.com and I found nothing for 96 to 98's. Is the install very difficult? Is there much to buy to make it happen? Thanks for all the help!!!

stock 3.5" pulley = 6psi. I made 422/402 rwhp/rwtq w/ that unit on a PI motor w/ bolt ons and crower st. 2 blower cams.

Its not a hard install, its just got alot of specific parts that must be purchased to install it.

Which you can only get from ford racing, or by fabricating and machining them yourself. the install kit is like $1100 which includes a ECU (which is junk, get a custom dyno tune), fuel pump, injectors, misc hoses, brackets, hardware, etc

 

[HeyLittleCobra]

Can't talk about selling it on here...I just got in trouble for that.

I was told I hafta put it in the classifieds for that. That will happen very soon.

Thanks for all the info. It is much appreciated.