Black = very nice

[Boss 351]

Looking real good! That's going to be real sweet once all done... don't forget the seatbelts, I don't know if that can be sprayed too?

 

[grey5.0beast]

hey guys, quick question....if my speedo bounces(really bad) the cable needs replaced correct?

I'd expect it to be the speedo gear on the tranny, they tend to strip the gears off of them.

 

[ryan218]

I'd expect it to be the speedo gear on the tranny, they tend to strip the gears off of them.

noob question? trans have to come out for this?

 

[grey5.0beast]

couple more pics

Looking very nec, but on the back of the console you might want to do another coat, I think I see some blue on that bottom corner.

 

[ryan218]

Looking very nec, but on the back of the console you might want to do another coat, I think I see some blue on that bottom corner.

already did..those are pics from last night.

 

[25thmustang]

Looking very nec, but on the back of the console you might want to do another coat, I think I see some blue on that bottom corner.

Could also be the blue carpet reflecting off it a little?

Looks good, keep going with it!

 

[El_CUCUY]

Coming out great ....as far as the seat belts .you can find some on ebay i purchased some for my coupe and are in perfect condition for 125.00

Keep the pics coming

 

[grey5.0beast]

Could also be the blue carpet reflecting off it a little?

Looks good, keep going with it!

Yeah thats what I thought oo maybe, so I said I think.

 

[grey5.0beast]

noob question? trans have to come out for this?

No it does not have to be pulled, its quite easy. Remove the bolt that holds the speed sensor to the transmission and pull speed sensor out of the transmission. Pull off the c -clip lock that slides over and pull the old one off. Push on the one and reinstall just like it was.

 

[bobbyd]

looking real good im tempted to do that to my car sometime

 

[ryan218]

with the blue seats ang it 90% together it looks good imo...i kinda like the look with the blue seats.

\

every fox should of come with black interior

 

[85_SS_302_Coupe]

Ya know i don't know why nobody has thought of this, but it just occurred to me that seat belts are woven nylon....and RIT dye will dye nylon just like it's fabric...so you can dye your belts black with that stuff and it should be totally permanent aside from possible sun fading, but you'll get that with anything. I know they'll dye because in the RC car world people use RIT dye to dye their wheels different colors, and the wheels are nylon, so there's no reason you couldn't do the belts too.


You can thank me later

 

[Curse]

I never throught I'd say this, but damn great job Ryan! Keep at it, can't wait to see the finished results.

 

[bgiles]

looks good hopefully mine will turn out as good

 

[blackened88lx]

Looks great Ryan.

 

[bigcat]

should have replaced the carpet while everything was out.

black is looking good.

 

[ryan218]

i got a couple finished pisctures ill post after i eat...im hungry

 

[85_SS_302_Coupe]

Ryan your seats are exactly like mine, but yours look to have better padding, while mine are a LOT less faded than that. My driver's seat is pretty beat down as far as the padding goes, but they're still pretty blue and have no rips.

 

[ryan218]

Ryan your seats are exactly like mine, but yours look to have better padding, while mine are a LOT less faded than that. My driver's seat is pretty beat down as far as the padding goes, but they're still pretty blue and have no rips.

yeah..thats what happens when you let a car sit for 7 years half under a carport..

im think im doing well with bring the car back from the dead

 

[85_SS_302_Coupe]

yeah..thats what happens when you let a car sit for 7 years half under a carport..

im think im doing well with bring the car back from the dead

Well... yeah? I wasn't bashing or anything, just stating the obvious. You're workin with what you've got and maybe it's a little rough but you're doing great