Swapping out the Heater Core

[shlby123]

In a 94 GT. I have done it before on my '89 (yes it's a bitch) with the help of one of the walkthroughs that's been floating around. The one with the pretty good pictures of the 87-93 Fox? But what about the 94-98 cars? Is there a walkthrough with pics of this job floating around anywhere?

 

[bmac50]

1. Remove evaporator case from vehicle.
2. Remove four heater core access cover screws, then cover from case.
3. Remove heater dash panel seal from heater inlet and outlet tubes, then pull heater core out of case.
4. Reverse procedure to install.

 

[shlby123]

Dont I need to remove the dash before I do all that?

 

[94CobraPace]

I have done a heater core on a 01 V6 and yes the dash has to come out. I also had to disconnect the ac lines to get it out.

 

[shlby123]

but is there a walkthrough on disassembling the dash on the 94-98 anywhere? Reading the shop manuals is like looking at glyphs to me.

 

[SQUEEZE&STROKE]

Check a haynes manual or online at (v)autozone.com

The dash is heavy and awkward.

There are 3 8mm bolts under the defrost trim near the windshield, and a few more inside (after taking out) the glove box. Both kick panels have bolts under them as well.

I always pull the steering wheel off to help with weight and size, but really only the steering coupler has to come loose. There are alot of conne`tors so take your time and have a buddy. Dont rush it, the dash plastic breaks easily as well as the connectors.

 

[stangzroastrice]

i have the perfect thread for you, it made taking out the dash a breeze when i was swapping out my heater core and replacing the a/c evaporator.
http://www.corral.net/forums/showthread.php?t=906849