Anyone know how to re-wire 94 to 03 Cobra Seats?
- Thread starter Davin
- Start date
-
Sponsors (?)
I think someone just talked about it (JP?). IIRC, he said the Snake seats have two power and two grounds so he merged the wiring and used aftermarket connectors to mate the seat wiring to the chassis wiring.
Certainly read NOTHING into what I said - it's only mentioned in case you feel like trying to find his post. It was on one of the Viper seat threads IIRC.
Good luck and enjoy!
Certainly read NOTHING into what I said - it's only mentioned in case you feel like trying to find his post. It was on one of the Viper seat threads IIRC.
Good luck and enjoy!
I stand corrected - his were GT seats. Maybe the wiring is the same (you'd think so but I dunno):
http://forums.stangnet.com/showpost.php?p=6999430&postcount=26
http://forums.stangnet.com/showpost.php?p=6999430&postcount=26
cjones
Founding Member
looks like there is one wire for lumbar support DG (16Gauge) and one for the rest of the motors DG (12Gauge)
WhiteDevil
New Member
Yeah HISSIN that was me. Two powers and Two grounds on my GT seats. I went to radio shack and they have white pin connectors. I got the two pin set up. YOu crimp the pins onto the wires and then click the pins into the connectors. I wired the two powers together and the two grounds together and then connected the pin. I got all my power options on the GT seats.
Methodical
Active Member
WhiteDevil
New Member
Bosko5.0
Active Member
You could use all the old wiring like I did! 
http://forums.stangnet.com/showpost.php?p=6470491&postcount=15
SEARCH BUTTON
http://forums.stangnet.com/showpost.php?p=6470491&postcount=15
SEARCH BUTTON
Methodical
Active Member
Bosko - did a search, just didn't search for "POS seat problems". Good thread though, thanks.
I did the re-wire..for the record I don't thinks it's two power and two grounds. It was like cjones referenced; there are 2 power (green) and one common ground (12 gag black). The third wire is grayish-brown with a blue strip and is for the seatbelt chime. Since the seatbelt connector is removed for our cars anyway, I just left this one alone.
Methodical - as far as where to get seats, you really just have to keep your eyes on the classifieds and see if any are in your area. Check if there are any local clubs or club web sites too, these are great resources.
I did the re-wire..for the record I don't thinks it's two power and two grounds. It was like cjones referenced; there are 2 power (green) and one common ground (12 gag black). The third wire is grayish-brown with a blue strip and is for the seatbelt chime. Since the seatbelt connector is removed for our cars anyway, I just left this one alone.
Methodical - as far as where to get seats, you really just have to keep your eyes on the classifieds and see if any are in your area. Check if there are any local clubs or club web sites too, these are great resources.
WhiteDevil
New Member
The are the newer stans "black" Dark Charcoal also known as.
I got a crazy deal because the guy just wanted them out. $180 bones. I see most sets for around 400.
Methodical
Active Member
good stuff.
the wiring of the 02 power seat harness was what i needed.
i picked up a set for $155 today.
the only flaw is there is a little tear on the driver seat.
i wonder how much it will cost to be repaired?
heres a few pics.
passanger side installed already.
what i didnt know was the seat bottom was different than the 94-98 seat bottom.
so i need to go back for the power seat track tomorrow.
old seat on left,new on right
notice how the old bottom is flat.
on the new,the front of the frame is recessed.
the wiring of the 02 power seat harness was what i needed.
i picked up a set for $155 today.
the only flaw is there is a little tear on the driver seat.
i wonder how much it will cost to be repaired?
heres a few pics.
passanger side installed already.
what i didnt know was the seat bottom was different than the 94-98 seat bottom.
so i need to go back for the power seat track tomorrow.
old seat on left,new on right
notice how the old bottom is flat.
on the new,the front of the frame is recessed.
That's a deal Harvey. Nicely done! Even if that repair is a little pricey, it's still a great deal.
If nothing else, ask around in your local Classic Mustang club forum. Those guys generally know the good local upholstery places.
If nothing else, ask around in your local Classic Mustang club forum. Those guys generally know the good local upholstery places.
thank's for the tip,Hissin.
these were too good to pass up.
i was unaware of the driver seat isssue before i bought these,otherwise i would have grabed the power seat track at the same time.
i just looked at the prices online.
the seats are going for $400+,
these were too good to pass up.
i was unaware of the driver seat isssue before i bought these,otherwise i would have grabed the power seat track at the same time.
i just looked at the prices online.
the seats are going for $400+,
I've been wanting a set of leather charcoal front seats.
