side exit exhaust

[iapexl8r]

I have a 65 fb and want side exit exhaust with x pipe does any have any pics I can see or know of a kit. thanx

 

[iskwezm]

sup Chris???
I might be selling my mufflers that have a mandrel bent exit in the near future once the turbo is on.you can barely see the pipe here.
View attachment 376857

 

[ron67fb]

I made my own for about $50 using Dynomax's "sidepipe installation kit" and a few clamps.

Yeah it's crooked but they're just clamped on and are easy to adjust. The outlets are even.

Other options are straight through DYnomax 'bullet' mufflers further forward and 90-degree pipes like someone else on here has, or Dynomax 'super turbo' mufflers that have the inlet and outlet on the same end.

 

[Sicarius428]

Damnit I want side exhaust too. How did you guys get around the subframes if you have any? My front is dropped 3 inches and my rear 2. I have about 3-4 inches of clearance at the collector with the TCP 1+2 subframe... Any suggestions?
Kevin

 

[66backinblack]

here ya go

http://store.summitracing.com/partd...4294908282+400361+4294924702+115&autoview=sku

 

[iskwezm]

Damnit I want side exhaust too. How did you guys get around the subframes if you have any? My front is dropped 3 inches and my rear 2. I have about 3-4 inches of clearance at the collector with the TCP 1+2 subframe... Any suggestions?
Kevin

Spin Tech make a new sub frame with a notch for side echaust.

I personally dont have any subframes..................yet

 

[blown65]

Spin Tech make a new sub frame with a notch for side echaust.

I personally dont have any subframes..................yet

I think thats what I'm going to do on mine. Both the subframes and the side exhaust.

Want the side exhaust so I can drop it off and put some extensions for when we go to the strip.

 

[silverbluebp]

I made my own setup using the Dr.Gas X pipe and some 2 1/2" aluminized pipe. I have some pics on page 5 of my Cardomain site.

 

[HistoricMustang]

Damnit I want side exhaust too. How did you guys get around the subframes if you have any? My front is dropped 3 inches and my rear 2. I have about 3-4 inches of clearance at the collector with the TCP 1+2 subframe... Any suggestions?
Kevin

It can be done. I will try to get some pics up this evening on how mine was set up with Dynomax mufflers.

HistoricMustang

 

[iapexl8r]

http://drgas.com/store/product.php?productid=3&cat=4&page=1 these will give you added clearence on your subs. or mabye this will work http://drgas.com/store/product.php?productid=18&cat=4&page=1 I still havent done this but I plan on using the dr gas frame clearence tubea and some magna flow mufflers http://cgi.ebay.com/ebaymotors/Magn...012QQitemZ220135341991QQrdZ1QQsspagenameZWDVW with a summit x pipe kit http://cgi.ebay.com/ebaymotors/Magn...012QQitemZ220135341991QQrdZ1QQsspagenameZWDVW I hope I can make it happen

 

[iapexl8r]

finaly started

this is what I started with a 3" summit xpipe 2 magnaflow round mufflers and some nascar boom tubes

View attachment 367038
View attachment 367040

 

[iapexl8r]

had to shorten approx 26" off the summit xpipe

View attachment 367011

View attachment 367016
just waiting for the final peice to come from summit. it looks like I will have to cut the boom tubes down quit a bit. will keep progress posted

 

[tweet66]

boom tubes?

iapexl8r, where did you get teh boom tubes? I like that look and it'll clear the sub-frame connectors...

 

[iapexl8r]

I got mine off ebay for 150 bucks I just typed in nascar in automotive parts and all kinds of super bitchen parts came up. Dr gass sells them for 269 each thats with mufflers actually it is a muffler
http://drgas.com/store/files/master/product_images/new%20bt%20muffler%
201%20MAIN.jpg
or you can get this one for 209 each

these are not finished still need welding and coating.

 

[thekid760]

http://www.boyceindustries.com/boyce-racing-index.html

 

[Tubo(2-bo)]

I dident realize there was this much hardware available for side exit exhaust. Sonnava Gun!!

 

[iapexl8r]

well i recieved the tubing I orderd from summit gawd I love them!!! Now I have the driver side mocked up looks like its gonna work. I had to notch the end of my tcp sub frame connectors and do some light massaging on the boom tube. I will have to add some kind of gusset later.
View attachment 366702

later chris

 

[JC6715]

Any updates? I'd to hear how that sounds when its all done. You having me thinking this might be a good idea!

 

[gonzothegreat]

What are those right after the X-pipe?
And what size are they please?

 

[iapexl8r]

those are magna flow mufflers.
View attachment 366255
http://store.summitracing.com/partd...4294923429+4294922711+400636+115&autoview=sku

started it with just the x pipe and the mufflers, its on the loud side but sounds bitchen!!