Hey new to the forum, just wanted to see what you guys where running for rear suspension. I just finished bulletproofing the rear and am ready to buy some upper and lower control arms to tie everything together. Thanks
Rear Suspension
- Thread starter FastFox89
- Start date
-
Sponsors (?)
87foxstang
Member
ive got Koni yellow adjustable shocks, BBK 1 1/2" lowering springs and stock control arms(which wont be there for long). I love the koni's and being able to adjust them, so i have no complaints.
I heard the megabite jr contol arms are great, my buddy has them and loves them.
I heard the megabite jr contol arms are great, my buddy has them and loves them.
Those t top cars are sick, your looks really clean
. Havent heard alot about those control arms, looking to get a set for christmas. I still have some time to figure out which ones I want.
. Havent heard alot about those control arms, looking to get a set for christmas. I still have some time to figure out which ones I want.
white99gt
Founding Member
This is a can be very debated..
What is the car gonna be actually used for ?Then we can recommend the right stuff ..
87foxstang
Member
Those t top cars are sick, your looks really clean
Thanks man
Running Koni's, FMS C springs, megabite jr arms, and a MM panhard bar here and am very happy with the ride/handling . Didn't bother with the adjustable uppers here because I doubt this car will see strip use just lots of street abuse 
90mustangfan
New Member
Im running Eibach drag launch springs(no Iso's), removed front sway, Thicker rear sway bar, Upper/lower Control arms, subfreames and reinforced battle boxes, Car Hooks pretty good on street tires, Back when I had 245 rear tires it cut 1.9-2.0 60fts on street tires, and now I have 295's in the rear, It has alot more traction with the wide tires. cant wait for track time
Its going to be mostly street/strip I welded up the torque boxes and have weld in subframe connectors. I have a fully built 347/c-4 combo.
white99gt
Founding Member
I personally love the steeda hardcore stuff..Strong enough to take a beating but quiet on the street(used on my 99(..
My 90 is mostly street, i use fms uppers with hotchkis lowers.
My 90 is mostly street, i use fms uppers with hotchkis lowers.
PUNISHER RACING
Active Member
UPR Street Kit and get a good set of springs. If you run the car on a transbrake they tend to hit hard so you might want to bag the r/r spring to compensate or just get an anti-rollbar. Also if you are having trouble getting the car to hook you might want to get adj. uppers and set your pinion into the neg. digits!
Maryland Stang
Active Member
Torque box reinforcements, welded in subframes, Steeda aluminum lowers, double adjustable uppers set at -2, B springs and Comp Eng shocks.
MrXCESSIVESPEED
Member
I run Mega Bite Jr lowers, Steeda double adjustable uppers, QA1 adjustable rear shocks, Stock v8 rear springs.
So far its been a best of a 1.58 60ft leaving from idle on a 275/50/15 M/T DR.
So far its been a best of a 1.58 60ft leaving from idle on a 275/50/15 M/T DR.
Similar threads
