Mustang II Member's rides
- Thread starter 77sleeper
- Start date
-
Sponsors (?)
parthos
Founding Member
My car is a 1977 Mustang Ghia, factory V8 car, with an auto. I purchased it when I was 16 back in 1996. It's been through countless changes, three engine builds (from the same block!!!) all in the name of being top dog on the street in my little city. The latest engine I built for it is a stroker 302 using a Scat all forged rotating assembly & srp pistons. A mild Crower solid cam (pulls 11 inches of vacuum @ idle), Victor Jr intake manifold, AFR 165 street heads, 850 demon carb, lot of custom made parts from motor mounts to pulleys, I made them all myself. The engine is built tough, with looser piston and ring gaps. What it gives up on the engine due to the looser clearances it makes up for using a shot of N2o. This is a third variant of the engine in my car. It's ran a best 1/8th mile of 7.20 NA, and 6.70 103 using some juice. I hope to get a low 6.6 or high 6.5 out of it. All runs were made in street trim, except for tires. On the street I use Hoosier quick time pro tires out back, the track I use slicks, though I see no traction difference, the switch of tires just makes my street tires last longer. All my runs were made with crappy headman headers, and 2 1/2 inch exhaust. I cruise this thing all the time, with a good cooling system using a griffin radiator, it never gets hot. To help out the street manners out back is a stock 8 inch rear end with 4.11 gears, and a powertrax no slip locker. Most guys run deeper gears for 1/8th mile racing, but I wanted something pretty street friendly.
Anyhow, some pictures
Rollbar made and installed by yours truly:
An Engine shot:
At the local cruise night, notice the stickers on the window from the drag races... I'm too lazy to take them off!
Anyhow, some pictures
Rollbar made and installed by yours truly:
An Engine shot:
At the local cruise night, notice the stickers on the window from the drag races... I'm too lazy to take them off!
Attachments
maverickwolfe
New Member
3-0-II
Member
maverickwolfe
New Member
to be honest I have no clue about the mirrors. everything that's been done to 'er was done by the previous owner.
I'm eventually going to put the cobra mirrors and door handles on 'er. - I'm goin 70s hotrod as a tribute to my dad and the shaved handles don't really fit my style ideas - plus dude took the locks off too so it's not lockable which can get annoying.
I'm eventually going to put the cobra mirrors and door handles on 'er. - I'm goin 70s hotrod as a tribute to my dad and the shaved handles don't really fit my style ideas - plus dude took the locks off too so it's not lockable which can get annoying.
feeble
Member
3-0-II
Member
Hey, thought I might join in.
When I bought it:
View attachment 338646
$8000 later and 1 trip to the hospital:
View attachment 338648
and my seasons greatings photo:
View attachment 338652
When I bought it:
View attachment 338646
$8000 later and 1 trip to the hospital:
View attachment 338648
and my seasons greatings photo:
View attachment 338652
MUSTANG J
Member
machineman
New Member
Here's some current pics of the ThunderSnake, and the Pro-74...
I hated these cars when they were new because they were such a departure from the earlier Mustangs, but looking back now, they were not bad looking cars and the ones I see here are really cool. Great job!
Dano78
Founding Member
I just noticed mine's not in here....
Here's pics of it before it got ran into and then clobbered by an autoshade the following winter.
Here's pics of it before it got ran into and then clobbered by an autoshade the following winter.
MUSTANG J
Member
Vegas Stang
New Member
- Feb 27, 2008
- 64
- 1
- 0
1977 Mustang II
Here is mine: Purchased in July of 2007, for $1800.00 this stock 77 302 automatic Mustang II was in very good condition and a show winner, but was just too plain. As with all my cars I do all the customizing myself on a VERY TIGHT budget, t.g. for E Bay. Believe it or not, all add ons (spoilers, scoops,vents and louvers) are painted using color matched & mixed rattle cans. The secret is time spent on prep. This has saved me $$$$$ to spend on all the other add ons. All stripes are custom designed by me and a friend on computer and transfered to a viynl cutter, then applied.
Here is mine: Purchased in July of 2007, for $1800.00 this stock 77 302 automatic Mustang II was in very good condition and a show winner, but was just too plain. As with all my cars I do all the customizing myself on a VERY TIGHT budget, t.g. for E Bay. Believe it or not, all add ons (spoilers, scoops,vents and louvers) are painted using color matched & mixed rattle cans. The secret is time spent on prep. This has saved me $$$$$ to spend on all the other add ons. All stripes are custom designed by me and a friend on computer and transfered to a viynl cutter, then applied.
scupking
Active Member
Here is mine: Purchased in July of 2007, for $1800.00 this stock 77 302 automatic Mustang II was in very good condition and a show winner, but was just too plain. As with all my cars I do all the customizing myself on a VERY TIGHT budget, t.g. for E Bay. Believe it or not, all add ons (spoilers, scoops,vents and louvers) are painted using color matched & mixed rattle cans. The secret is time spent on prep. This has saved me $$$$$ to spend on all the other add ons. All stripes are custom designed by me and a friend on computer and transfered to a viynl cutter, then applied.
Awesome car
heres mine, this car has been in my family for a while, when i got it, it has 60k origanal miles.......and a rod knock.....
i pulled the engine, went .030 over, forged speed pro 9:1 pistons, i used the stock crank because a little short on money, i put in a high volume oil pump, a razor cam from hi-tech performance, edlbrock performer intake, edlebrock #1405 carb, 7:1 ford racing rockers, and a few other goodies, its a project so it still has alot needed, i plan on gt-40 heads, a RPM air gap, holley 650cfm vacum secondary carb, mallory unilite and a msd 6al.........take a look thanks
i pulled the engine, went .030 over, forged speed pro 9:1 pistons, i used the stock crank because a little short on money, i put in a high volume oil pump, a razor cam from hi-tech performance, edlbrock performer intake, edlebrock #1405 carb, 7:1 ford racing rockers, and a few other goodies, its a project so it still has alot needed, i plan on gt-40 heads, a RPM air gap, holley 650cfm vacum secondary carb, mallory unilite and a msd 6al.........take a look thanks
Attachments
Awesome car
hey!, i have talked to you a few times on the II network
but i was wondering where you got those wheels, and what size are they?...and the tires?
haha thanks!
MUSTANG J
Member
Mean 78 your project is lookin' good. Most of the cars here were owner built from nothing.
Like Mine:
Before:
http://i155.photobucket.com/albums/s309/IMACHU2/1.jpg
After:
http://i155.photobucket.com/albums/s309/IMACHU2/Mustangdriverssidefront.jpg
:SNSign:
Like Mine:
Before:
http://i155.photobucket.com/albums/s309/IMACHU2/1.jpg
After:
http://i155.photobucket.com/albums/s309/IMACHU2/Mustangdriverssidefront.jpg
:SNSign:
Similar threads
Electrical
Please help !