saleen 281 wing guys

[02LaserRed2V]

Mine was like that at fist. U need to match bottom of spoiler to line on top of lisence opening. Then it'll match

Mine did match. It slid down about a week later. I think next time I'll have them use epoxy.

 

[turbogt]

Use BULLDOG Adhesion promoter wherever you are going to put the 3m tape.. you can buy it in the auto paint dept at Walmart.. It's in a purple spray can.. Trust me, if you don't use it, the tape will eventually let loose.

 

[slvrgoblin]

Has anyone experienced any difficulty in backing into things with the wing sticking further out than your bumper?

 

[mity2]

sorry hit "enter" once too many

 

[mity2]

Mine did match. It slid down about a week later. I think next time I'll have them use epoxy.

I feel your pain. it took me few try in span of 2 years almost to get it right.

u need adhesion promotor. Don't skimp out on this.
then u MUST heat up serface worm to touch, before apply 3m tape.


DO NOT use clear tape that comes with Saleen. they stick about as good as couple in trailer park

 

[Stang|ess]

Has anyone experienced any difficulty in backing into things with the wing sticking further out than your bumper?

No. The wing only sticks out about 1 or 2 inches past the bumper.

 

[stang2004]

I'm having some problems with this wing fitting, the sides are sticking off the edge a good inch or so and looks like hell, and i cant seem to get the key hole to line up correctly. I really like this wing, but its not seeming to line up correctly and i dont want to scratch the paint.