trick flow combo?

[DaBoss302]

anyone?
got ET times from just the basic kit

 

[90_Red_LX]

My setup is more aggressive than the tfs kit and my car is only tuned by cranking the dizzy and playing the fuel pressure regulator. I also run 24lb injectors and a wet shot and she gets plenty o fuel through the stock lines and rail. Just upgrade the fuel pump.

 

[xricer]

good setup but I wish it would pull a little harder down low

I have the tfs kit and mine pulls hard down low. I had the systemax kit on my last car (92 notch) and the tfs kit seems to work better. Hard to say though my new car (91 notch) has some different parts on it than the 92. I also had 24lb injectors on both and have plenty of fuel. I say the kit is well worth the money.... so much more fun than a stock car.

Craig

 

[8.8mustang]

did the math from 2 years ago's 1/4 time in my buddies 88
trick flow track heat kit
1.7 roller rockers for a little more lift the cam that comes the kit comes with max's out the heads for lift and flow so not sure that this helped
75mm throttlebody and maf
30lbs. injectors
under drive pulleys
electric fan
mac shorties
off road h-pipe
flowmaster 2.5 cat back
326hp is what an et calculator said it made not bad concidering he bought a dss short block ya it blew up dss sucks proble would had made more power if he would have bought a good bottom end
9.5:1 306

 

[BB 91' NOTCH]

Mak Performance has the trick flow kit for 2149.99. Call Summitt and they will beat the price by a buck. Just had mine installed this week by Performance Specialties in Pottstown, P.A. I agree, i wish it had a little more at low rpm's but it screams at the top end.

 

[SuperStang83]

How much did Performance Specialties charge for the install?

 

[BB 91' NOTCH]

It was supposed to be 550.00. He fixed a few things like leaking injectors, put on new headers and T.B. So price was a little higher. Dude has some bad ass cars there: fastback shelby king of the road, 67 pro street chevelle, 66 coupe. Seems to do good work.He had the car less than a week. He also has a dyno.

 

[idaho_88]

I have had my HCI (Track Heat, Stage 2) on a 331 blower motor for 2 years now. It is still NA and put 320/340, both right after I installed it and after 1 full year. I am still messing around with my PMS tuner, so I suspect it will possibly put down another 5-15 rwhp. I also have ran a best of 12.89 at 106 @ 3000 ft.

 

[SuperStang83]

It was supposed to be 550.00. He fixed a few things like leaking injectors, put on new headers and T.B. So price was a little higher. Dude has some bad ass cars there: fastback shelby king of the road, 67 pro street chevelle, 66 coupe. Seems to do good work.He had the car less than a week. He also has a dyno.

Yeah been there quite a few times and there is almost always really nice cars, especially Mustangs there.