Installation of additional Audio Equipment

[xxrequiemxx]

After the years with my previous cars, I have built up a stock of high end audio equipment.

-Rockford Fosgate 4 channel amp at 500w for highs
-Rockford Fosgate 2 channel amp at 1000w for subs
-3 Rockford Fosgate 12" subs

Whenever I sell my car - I leave the speakers inside of it b/c of the hassle required for pulling them out.

I would like to install these two amps and 2 of the 12" subs I have. However, I would like this to look as professional and neat as possible. I have done all the prior audio installs in my prior cars, but wanted to go above and beyond for the stang.

What I am looking for are ideas for a really nice and clean install. Has anyone done a two amp install? Are there any vendors out there that make nice enclosures that fit our trunks well?

Any info is appreciated!

Nick

 

[kooldawg6]

You can try over here http://forums.stangnet.com/forumdisplay.php?f=14
CDC has there single trunk enclosure for our car.
There should be several places on the net that would have S197 custom audio installs. It would be nice to fabricate a custom setup in the trunk of mine and have it easily removable as the Shaker1000! 3 wire harnesses(all in the same location), 6 bolts and 2 nuts. Presto, the sub box and amp rack are outta there(just over 5 minutes)!

 

[bootman]

You can try over here http://forums.stangnet.com/forumdisplay.php?f=14
CDC has there single trunk enclosure for our car.
There should be several places on the net that would have S197 custom audio installs. It would be nice to fabricate a custom setup in the trunk of mine and have it easily removable as the Shaker1000! 3 wire harnesses(all in the same location), 6 bolts and 2 nuts. Presto, the sub box and amp rack are outta there(just over 5 minutes)!

Something like this?
http://www.mtx.com/caraudio/products/manualsQuickInstall/thunderforms/FMUST05_specs.pdf

 

[cda1028]

Here is another one that I have seen. But it only holds one 12".

http://www.qlogicenclosures.com/c-1953-mustang-coupe.aspx