boost gauge on cobra

[whtnotch]

Doing some work on my brothers car and have a question on the boost gauge.Where do I "T" into?needs to be out of sight and theres alot of vacs on this car up top.

thanks

 

[Uncle Meat]

And your brothers car is a what kind with what mods again? I must have missed that part.

U.M.

 

[whtnotch]

its an 03 cobra.mods don't really matter Im talking bout a boost gauge.If you want to know his mods its MajStang or something,

 

[Uncle Meat]

Well on the 03/04 Cobra the stock line runs behind the glovebox and that's the easiest place to get to it and add a "T". Just remove the glovebox and it's right there.

U.M.

 

[whtnotch]

Will there be only one vac hehind the glove?sory to get off subject but also installing a pyrometer.now my brother says he wants it installed around the collector I thought its to be only inches from the cylinder head??


Does the Cobra have a cylinder thats known for detonation or high exhaust temp?mabey just install to watch that cylinder.....?

 

[whtnotch]

how do i get the head light switch pull/push knob off?

 

[Uncle Meat]

Will there be only one vac hehind the glove?sory to get off subject but also installing a pyrometer.now my brother says he wants it installed around the collector I thought its to be only inches from the cylinder head??

Does the Cobra have a cylinder thats known for detonation or high exhaust temp?mabey just install to watch that cylinder.....?

There's only one vacuum line behind the glovebox that I'm aware of.

Not sure on the install location one would use for a pyrometer.

Cylinders 7 & 8 are the suspect holes on the 03/04 Cobra's due to a poorly designed water passage on the drivers side head.

how do i get the head light switch pull/push knob off?

If you pull the headlight knob all the way out and turn/spin it you'll see a tab where you can insert/press a small screwdriver and release the catch which holds the knob on.

U.M.

 

[whtnotch]

thanks alot all the info was very accurate.:SNSign:

 

[Uncle Meat]

That's what web forums were designed for... Information exchanges.

U.M.