steeda clutch quad

[StangCrazy302Gt]

im installing mine tomorrow and noticed that ther is a white washer and a silver washer or spacer , it doesnt say where these two go.. any ideas???

 

[cenok is family]

it's a spacer and a washer. iirc, it goes spacer, quadrant, then washer. if you look at the factory quadrant, the hole that slides on the rod has a piece that sticks out making it wider in that area. if you don't put the spacer on, the quadrant will be able to slide around. i'll see if i can find a pic to better illustrate what i'm talking about.

you can kinda of see how it's installed here:

here's a better pic of the stock piece installed notice how the hole on the quadrant over the shaft sticks out causing the quadrant to stand off from the bracket:

 

[StangCrazy302Gt]

a pic would be verry help full... the quad im replacing wasnt stock and there wasnt any spacers used.. so im unsure as to which one goes where

 

[cenok is family]

updated my post, check it out again.

 

[StangCrazy302Gt]

yes white washer on outside next to pin n silver im guessn on th eoutside neer the pin

 

[cenok is family]

yes white washer on outside next to pin n silver im guessn on th eoutside neer the pin

??

put the spacer on first, then the clutch quadrant, and then the washer last, next to the pin

 

[StangCrazy302Gt]

yea i got u now.. i didnt see the last pic.... i cant multi task to tired lol.... but thanks that help alot.. maybe u can tell me how hard it will be to do the part under the car lol

 

[cenok is family]

muahaha you're going to have TONS of fun! it's not hard, but it's one of the biggest PITA jobs. i've never been more mad at a mustang than i am when i have to install one of those F'ers. word of advice, take out the seat and (if you have one) the floormat. you'll have to press the clutch pedal to the floor to get the rear "ear" of the quadrant on the second post, you might have to pull the carpet back right behind the clutch pedal also, to get the pedal to go as far back as it will go.

 

[StangCrazy302Gt]

lol ... i was thinking of taking the seat out .... i was talking the end by the clutch remember im doing this on my back in the drive way

 

[cenok is family]

ohh..it's easy, just get a wrench or something you can pry on the clutch fork with.

 

[StangCrazy302Gt]

soon as it stops raining here i will let you kno how it went.... thanks for the fast responces