Dynoed my car...4.6L PI guys how much HP???

SVT32VDOHC

waiting for the next hack atta
Founding Member
Nov 22, 2001
3,501
27
119
Motor City
I installed a 2001 GT 4.6L 2V engine with a T45 transmission and rear end in my notchback. Mods are CAI, BBK o/r H pipe, MAC 2-1/2" cat-back, and a 3.73 gear. No tune, no pullies.

241RWHP and 283RWTQ. I thought that was was pretty good. Videos are in 5.0L Talk under "Project 81 Hack Job" ( which is my progress thread.)

I'm looking to see what PI 4.6L's with similar mods are putting down. If you have the same mods or maybe like intake, plenum and or T-body or all three, list your mods and numbers. Thanks
 
  • Sponsors (?)


hey svt, i have the EXACT same setup as you, same year, same tranny, same mods, and first pull i put down the same numbers as you, after 10 pulls she started gettin tired and puttin down 239hp with 282tq
 
hey svt, i have the EXACT same setup as you, same year, same tranny, same mods, and first pull i put down the same numbers as you, after 10 pulls she started gettin tired and puttin down 239hp with 282tq

Yeah, once they get heated, they don't like to produce as much HP. It was a dyno day at my tuners shop, so two pulls per person, and he did about 22-25 cars. My two pulls were back to back and I only lost 0.9 HP and 1 TQ. I'm sure 3-5 pulls you would have started to really see a loss.