Dynoing on saturday

[rayvinton]

Finally getting the car dynoed on saturday hoping for around 270 but we will see what do you guys think? I've got - steeda CAI, FRPP 65mm TB, Dragon upper plenum, steeda UDP, Bassani X-pipe, flowmaster Cat Back, and a So Cal Tuning Custom Tune. Soooo...

 

[98COBRA281]

270 sounds a little high... ill say 257hp 295tq

 

[Crzyhrse]

Throw some Long Tubes on there and I think you'd hit 270. Then some cams and your in the 290's.

 

[02nightmaregt]

+1 270 sounds linda high. I'd say around 255/290

 

[lvmustanggt]

265rwhp and 302torque.

 

[96GT281]

260rwhp 292rwtq

 

[BurningRubber]

255 rwhp 290 rw tq.

I put down 258 rwhp and 314 rw tq with the mods in my sig, but I think the tourqe rating was a little off.

 

[rayvinton]

X That, Dyno day was canceled due to weather it sux but o well had to reschedule to some time in December.

 

[myponyrocks]

gonna have to say high 240's if you're lucky for the RWHP area. Tq very low 300...

With full bolt ons and tune I put down 265/31X and my car dyno'd a little over 230 rwhp with just flowmaster weld ins.

 

[rayvinton]

you guys are saying so low but i was just wondering my 1/4 is still at a 13.62 and my 60' 1.88 and this is before the aluminum drive shaft, new 10 way adjustable shocks and a tune. all of these little HP Calculators say i should have around 280's
anyway just wanted to hear some thoughts on that also.

thanks
ray

 

[02nightmaregt]

Damn! December! They must be freaking really busy?

 

[rayvinton]

no it has been raining around here and the guy said he doesn't run the dyno when it has rained outside. because of all the tires being wet i guess?

 

[02nightmaregt]

Ok nevermind i've been soo busy lately i actually forgot that it'll be December next week. Anyways yea that makes sense. BTW you may make some good power, but track time don't always mean high hp. It sounds like you have a good suspension and the lightweight d/s frees up some power too. What are your other mods?

 

[rayvinton]

i have steeda 18's all around and i still leave the front ones on they weigh about 45 a peice with the tire on it 3.55 gears, steeda triax shifter, and eibach sportline springs

 

[OC Stang]

You should get about the same as I have in my signature. I got a custom dyno tune from same people and we have similar parts. Except your TB is kinda small. But I do not have my pulleys on. Of course every engine is different, but I would be very surprised if you have over 260 HP with that setup. Owner of So Cal who tuned my car says he really only sees engines get higher than that with our setup must have LTs. Torque over 300 is surprising to me too. Maybe has to do with gears.