Finally got my dynotune and some numbers

[ptfoxbdy89]

Went to dynospeed racing last wed... and got my car custom dynotuned which is night and day guys if you have the money get it done!! anyway thought i would share my numbers with ya i made 305rwhp and 328rwtq. the mods are light if you ask me a air raid cai and pypes offroad h and flowmasters with an sctxcal 2 here is a you tube link as well!!!
YouTube - SVTOA-Memphis Preston's 05 Mustang GT on the Dyno @ DynoSpeed Racing!

 

[chad9350]

Very good numbers for those mods... just a little more track time and you'll be in mid 12's with those numbers for sure.

 

[ptfoxbdy89]

thinkin about cnc my stock heads and frrp cams or comps but why did your torque drop that much??

 

[chad9350]

before heads/cams I dyno'd 308hp/320tq: those are peak #'s not under curve and I ran 12.60 at 110mph all day in Houston and Evadale Tx. in July.

YouTube - SRT8 vs 2005 Mustang GT

YouTube - 2005 Mustang GT 12.61

YouTube - Houston4



I gained 82hp at 6000rpm w/ heads/cams/inj

Dyno's are tuning tools; all are different.

 

[gashog]

Went to dynospeed racing last wed... and got my car custom dynotuned which is night and day guys if you have the money get it done!! anyway thought i would share my numbers with ya i made 305rwhp and 328rwtq. the mods are light if you ask me a air raid cai and pypes offroad h and flowmasters with an sctxcal 2 here is a you tube link as well!!!
YouTube - SVTOA-Memphis Preston's 05 Mustang GT on the Dyno @ DynoSpeed Racing!

Those are real nice numbers.

Funny how much extra you have to spend to get the advertised horsepower out of these cars .

 

[ptfoxbdy89]

i know right?? but im pretty much a walking good deal i didn't pay anywhere near retail for any of my set up so i get by!! so far i have an air raid cai with tb spacer, offroad h, flowmasters, an xcal 2 with 3 custom dyno tunes, a hurst sts and some nitto drag radials.. all for around $850 think that stuff retails for about $2300 so im ok with that

 

[V8JamesGT]

Where did you get your dyno tune from and how much did it cost?

 

[ptfoxbdy89]

Dynospeed racing in memphis tn from joe and john got a number and everything if you want it don't know what your location is normally if you have sct stuff his custom tunes with dyno pulls are around $300 lol and i get a forum discount at svtoa-memphis so it was way cheaper than that..

 

[BLAKDOUT]

what kinda numbers you think id be looking at with mods in sig? going to have mine done sometime next month hopefully, tryna get a roundabout number to hope for

 

[garbledwords]

"305rwhp and 328rwtq"

Very nice indeed. Currently I make 286rwhp and am planning on UDPs and a dyno tune this spring.

 

[BLAKDOUT]

how much power will i possibly gain with the Longtubes?

 

[chad9350]

When do you plan on getting to the track w/ some DR's?

 

[ptfoxbdy89]

blackedout with a good tuner your lookin at about 310rwhp and 330 rwtq thats with a good tuner and in my neck of the woods im not sure what your altitude and what not is and those numbers are with a custom tune not mail order... like you sit your probably at 290ish?? its all in the tune man and i hate to sound cocky but i have the best.. i made descent numbers and my air fuel was perfect!!

 

[08RetroV8]

x

 

[danGtheTman]

blackedout with a good tuner your lookin at about 310rwhp and 330 rwtq thats with a good tuner and in my neck of the woods im not sure what your altitude and what not is and those numbers are with a custom tune not mail order... like you sit your probably at 290ish?? its all in the tune man and i hate to sound cocky but i have the best.. i made descent numbers and my air fuel was perfect!!

What is your number at the flywheel?

 

[ptfoxbdy89]

don't know what the flywheel number is i would guess 15 percent more?? i guess thats what the tranny and drive line takes away?

 

[danGtheTman]

don't know what the flywheel number is i would guess 15 percent more?? i guess thats what the tranny and drive line takes away?

You're probably around 340 at the flywheel, which I say is pretty cool for a 281
cu. in. displacement.

 

[ptfoxbdy89]

guess it was built on the right wednesday.. lol