can i fit 325/50/15 bfg drag radials on 15x10 welds on fox?

[STREETFIGHTER50]

what to do to fit these on a fox? also, does anyone make a 295/50/15 drag radial? i have 15x10" prostars with 6.5" bs.

 

[bentley429]

um 295 or 325?? Ive seen 325's I believe but it looks like crap the way they stick out and I am sure it would rub. 275/60 on a 15x10 6.5 bs fits nicely though and should provide enough hook for anything your trying to do.

 

[ttop88]

Yes, if you use a big enough hammer.

 

[ttop88]

Another view

 

[STREETFIGHTER50]

Another view

wow! thanks for the pics! those 325's look wicked on a bad ass coupe! few q's for ya:

*did u roll or cut the outers?
*how about inside? how big a hammer did u use?
*do u drive it on the street?

wish they made 295/50 dr's. don't see em in the summit catalog.

 

[ttop88]

Not my car. They are m&h tires. They run very narrow. A mickey 275/60/15 has the same cross section. The back was beat to death and the front lip was rolled straight up.

 

[ttop88]

27/11.5 quick time pro is as close to a 295 50 as you can get as a DR that I know of.

 

[STREETFIGHTER50]

any more pics? underneath?

 

[NIKwoaC]

Yes, if you use a big enough hammer.

I just can't imagine how that is a good idea. Does the rear suspension have any travel at all? It just looks like a good excuse to shred an expensive tire.

To the OP, if you really want to fit 315+ size tires, you're starting to get into mini tub territory. 315s can be made to work, but only with the exactly perfect offset wheels, fender rolling, and a really BFH.

 

[bentley429]

There is no way that coupe doesn't rub when it goes over a bump.

 

[90lxcoupe]

those tires on the coupe arent M&H, they are the same pattern as a MT drag radial

 

[bentley429]

That too.

 

[306notchback]

27/11.5 quick time pro is as close to a 295 50 as you can get as a DR that I know of.

The quicktime pro isnt a drag radial!

 

[ttop88]

The quicktime pro isnt a drag radial!

I didn't say it was. I said it is as close to what he wants as he is going to get.

As for the info on the car and tires. All info came from the Corral, where the owner of the car posted it.

 

[a885.0]

That coupe posted above I believe belongs to Brent Davis from turbomustangs, I pretty sure it has a homemade mini tub and the tires are M/T 325/50's. To do it right you have to mini tub it to run 325's.

 

[Evilfox]

That coupe posted above I believe belongs to Brent Davis from turbomustangs, I pretty sure it has a homemade mini tub and the tires are M/T 325/50's. To do it right you have to mini tub it to run 325's.

+1. It is mini tubbed and it does belong to Brent Davis.

 

[STREETFIGHTER50]

so does anyone make a 295/50/15 drag radial? don't know why do they jump from 275 to 325??

 

[90lxcoupe]

so does anyone make a 295/50/15 drag radial? don't know why do they jump from 275 to 325??

BFG did, dunno if they still do... but it may have been a 295/60, which was like 29.9 inches. Thats a pretty tall tire and im pretty sure it wouldnt fit. 275/60 is about as much as your going to sqeeze out of a fox wheelwell with no mini tubs