from throttle body to supercharger

[autumn_again]

looking for something similar to this, for 94-95 throttle body.

i am not quite sure what was wrong with the plastic piece that vortech supplied, but my brother doesn't like it anyway, so he wants to go with something like that. he wants metal preferably he doesn't like the flimsy plastic crap.

 

[Danman765432]

first you are going to have to do a fox throttle body conversion, i think there is a write up in the how to section

 

[sn-95matt5-0]

94-95 POWER PIPE, FOR VORTECH S & T TRIM MUSTANG

there ya go buddy

 

[FlyBy763]

Nobody makes a metal discharge tube for the 94-95 throttle body set up that I am aware of. It would have to be custom made.

 

[ProKiller]

besides, the fox t/b is a better setup than the 94-95 style anyway.

 

[autumn_again]

besides, the fox t/b is a better setup than the 94-95 style anyway.

we've got the fox one now i got that with my blower, but he bought a throttle body and everything, so he didn't want to have to switch over if he didn't have to.

matt, isn't that for going from the blower intake to the fender? i know it says the actual product may vary, but judging by the shape.

 

[turbogt]

we've got the fox one now i got that with my blower, but he bought a throttle body and everything, so he didn't want to have to switch over if he didn't have to.

matt, isn't that for going from the blower intake to the fender? i know it says the actual product may vary, but judging by the shape.

Powerpipe is on the inlet side of the blower.. from MAF to impeller

 

[sn-95matt5-0]

sure does i didnt notice that when i first looked at it.

i'll keep looking around though and see if i can find something.

 

[sn-95matt5-0]

nevermind

 

[onebad95]

You just have to get on the phone with Vortech. You can buy the fox inlet tube. From the blower to the throttle body. You can get it in polished as well. I believe you will have to cut it a hair to make it work on our car's.

 

[YEAHLOH95]

anderson for makes a metal kit look under power by pass kits

 

[rio95]

If it were me I'd sell the TB and go with the fox setup. Well worth the time in my opinion. The SN95 setup sucks and now would be the time to do the swap.

 

[Redsnk95]

I ran the AFM Power By-Pass kit on my car back when I had a T-trim with the 94/95 throttle body setup. It uses a metal big diameter discharge pipe.

 

[gmkillr]

Here's a picture of the one that I used on my car.
It's aluminum and a much nicer/bigger design that the plastic vortech 94-95 piece.
If anybody is interested in it along with the upgraded bypass valve setup, i'm selling the whole setup.
Drop me an email if interested.
[email protected]