Ok so it's been a while since I've been around but it's winter project time and I need some suggestions. First off here is my list of mods
vortech V1 S-trim with 3.33 pulley
anderson ford motorsports power pipe
306, with forged pistons
performer heads, 194's 170cc
performer intake
75mm throttle body with adapter
crane 2031 cam, lifters and 1.7's
dual roller timing chain
30 lbs invectors
255 lph fuel pump
votech trex in line
fmu and msd btm
canton main girdle, windage tray and oil pan
Well i guess that's the basics anyways. Now i was wondering what head gaskets are a good match for this combo. I'm looking for something that is good quality and gooing to stand up to some boost.
Also what intake gaskets are you edelbrock guys running, while i'm putting it together I would like to gasket match the heads to the intake.
Thanks again
vortech V1 S-trim with 3.33 pulley
anderson ford motorsports power pipe
306, with forged pistons
performer heads, 194's 170cc
performer intake
75mm throttle body with adapter
crane 2031 cam, lifters and 1.7's
dual roller timing chain
30 lbs invectors
255 lph fuel pump
votech trex in line
fmu and msd btm
canton main girdle, windage tray and oil pan
Well i guess that's the basics anyways. Now i was wondering what head gaskets are a good match for this combo. I'm looking for something that is good quality and gooing to stand up to some boost.
Also what intake gaskets are you edelbrock guys running, while i'm putting it together I would like to gasket match the heads to the intake.
Thanks again