Carnage pics from clutch blowing up

Josh79

New Member
Sep 7, 2005
126
0
0
South Dakota
Here are some pics of what is left after i blew the clutch out of my 95 a few months ago. Just got around to fixing it

DSCN0018.jpg


all the pieces that i took off. there was quite a bit on the road lol

DSCN0017.jpg


DSCN0016.jpg

what was left of the bellhousing. it was actually completely broken off the block. Managed to brake an ear off the block too :mad:

DSCN0013.jpg


flywheel wasnt fixable had to get a new one

DSCN0014.jpg


clutch plate in 4 pieces. i picked the 4th off the road

DSCN0015.jpg


what was left of the clutch disc... basically nothing

so this is what happens when god decides ur having too much fun lol
 
  • Sponsors (?)


ya there is actually a dent in the bottom of the tunnel/floorpan where it hit. it was very close.

ya i wish but no i just picked up a used stock one because i have no money. i dnt think my cf df clutch will come apart like that under stockish power...

well i was doin around 5k in 2nd lol. just got a water pump, harmonic balancer and distributor put in. celebratory burnout, got em spinning good and let go of the brake and shortly after a grenade went off. i noticed the bearing retainer was broke. i almost wonder if that broke locked up the tranny and the motor wanted to keep spinning so boom. its hard to tell because everything is ****ed pretty much lol. the trans was already needing a rebuild. 2nd n 3rd would grind n it didnt want to downshift to 2nd etc. i actually had the clutch and tranny already just waiting for a good time to put them in. figured id do it when i wasnt driving it. then this happened
 
If you can't afford a scattersheild, you can weld or bolt a 5" wide metal plate (1/8"-"1/4 thick) around the top of the trans tunnel on the same plane as the clutch assy. Would give a little extra protection for if this ever happens again.