How wide can I go??

[srad 750]

Wanting to put some 17 or 18 inch wheels on the fox, but I dont know how wide of a wheel I can put on it. I would like to go with a 10 in the rear. I have a SN95 5 lug conversion in front and rear.

 

[93 LX]

With the right wheel fitment you can get 10" under the fender however you will still need to roll the fender lip. With that said you need to have a really need a good wheel fitment specialist there to help you.

 

[srad 750]

How do you roll a fender. I know im a newbie.

 

[93 LX]

Some say use a bat on the tire and roll the wheel around so it presses the lip up. the right way is to you a tool that most wheel shops have. It bolts to the hub and it has a roller that will press the lip up.

Eastwood Fender Roller Tool

 

[BK_CAULEY]

did you use the entire rear out of the sn car? if so its gona push you out and limit wheel size. at the most a 17,18x9

 

[parrish5o]

With a good lower control arm replacement like Megabite Jrs you will be able to remove the quad shocks and gain a little bit of clearance for a wide rear tire also.

 

[srad 750]

no i just used the rear axles off the 95.