Whats better for TB acufab or BBK??

[Adam95GT]

I picked up a street heat + TB + egr spacer today for $200... the tb and elbow are polished acufab... but i have a bbk.... What do you think is better quality... i just picked this stuff up to resell...

 

[95mustang_gt]

I had both and didnt like the bbk becaused it whisle all the time.

 

[Killercanary]

My vote goes to Accufab. BBK's old problems with the blade screws falling out and down into the engine scared me off for life from running their's. This was YEARS ago though so I'd hope this is no longer a problem.

 

[Pokageek]

Accufab. However both of those look like crap to be honest...like someone put them thru a sandblaster or something. My squeal was caused by the wrong gasket. It may be the same problem with bbk's ..incorrectly manufactured or matched gaskets.

 

[Adam95GT]

accufab cleaned up a bit wit some chrome polish.

 

[Stopsign32v]

Heres my Accufab against the old Edelbrock

 

[nmcgrawj]

Accufab.

 

[95Vert383AOD]

Ill take the ones thats not made of Cast Aluminum!!!! The one that doesn't have lines from casting!!!

I think i have a spare 70mm Accufab TB and EGR Spacer.

 

[ProKiller]

accufab

 

[Black95GTS]

The accufab is a better unit.

BUT. If you picked all that stuff up to resell it, you won't get much for the BBK but the accufab will hold its value.

Adam

 

[Adam95GT]

well seeing that i think the street heat is basically sold for $350.... im already up $150.... Anything else is just gravy.... SO i figure ill clean up the accufab.... hold on to it for my self... sell the bbk i was going to use...

 

[nunly94gt]

I had the BBk 65mm with no problems at all, Killer is just whinning a bit.

 

[02 281 GT]

I wish Accufab made a throttle body for the '94-'95 cars.

 

[rio95]

This is an easy decision as you can see by people's responses. I agree!!!!

Unless you want EGR I hope you aren't running that spacer on there. If you want a nice EGR delete plate let me know as I sell them on Ebay and Corral. I have both 3/8" thick and 1" billet spacers with 75mm or 90mm bores (can do custom ones as well).

 

[turbogt]

No comparison... Accufab tb's are gorgeous...

 

[BlackVert]

everyone i have heard say accufabs are the best. problem is they dont make a tb for 94/95s

 

[final5-0]

I won't go to the trouble to say which I think is better

One does cost a bit more than the other

Most of the time in life ...

Quality things require more of an investment than average things

Grady