Official Adam95gt Pictorial Progress of Swap / Clean Up

Mocked up....
DSCF7053.jpg

DSCF7052.jpg

DSCF7050.jpg

only this weird is the different tps connector possibly... or so i think...????
DSCF7054.jpg
 
  • Sponsors (?)


for the alt cable go to the local autozone or advance auto and buy a battery cable, they come in all kinds of lengths (even up to like 6') and are pretty cheap. Just buy wire connections for the ends, cut the ends off the battery cable and crimp the connections on and go :nice:

I need about 20ft. its gotta go from the push pull switch to the alt... so it kills the car thanks though
 
I need about 20ft. its gotta go from the push pull switch to the alt... so it kills the car thanks though

We have a place in Canada called princess auto, similar to the american Harbour frieght, i think. They sell welding cable by the foot, in all sizes, which would work perfect for that, or you could buy a 4gauge Stereo Amp kit, although you will prolly pay out the a$$ for that
 
Airgas is pretty big in the Philly area so I'm sure they're in Jersey too....they're a gas supplier and have welding supplies including the cable. Check them out.

For the Fox throttle body, you're going to need to cut the stock connector off your harness and get a fox connector I believe.

Man, if I was still on the east coast, I'd come by and give you hand...this is a huge project.
 
at the risk of clogging up adams buildthread with OT chatter, yes we will be. Me, Paul, Rich, Tom, Troy are all going all three days. defineately give one of us a call if you can find us.
 
at the risk of clogging up adams buildthread with OT chatter, yes we will be. Me, Paul, Rich, Tom, Troy are all going all three days. defineately give one of us a call if you can find us.

Drop me a pm with your #

I already have Pauls #

I think Paul will be parking with our local board "Steel City Stangs" as he signed up on our local board.

See you there bud!:nice:
 
my car wont be tuned or painted by then... radical racing tunes cost 650 :(

no bother clogging this up lol its all good with me guys!
Posted via Mobile Device

Check out JDs High Performance, they're probably 30 minutes from you. I wouldn't normally recommend them because I've always thought they were expensive and not very personable, but they do good work and an SCT tune will be less than 650.
 
Why are you using a push/pull switch?

If its to be legal to race then.........:jaw:

Your battery box is not drag race legal.

Hope to see you at Carlisle...............:nice:

Because I was told I could not run last year with my turn style knob. My 2009 NHRA rule book just came in and I see nowhere that it says push pull required, only that if it is a push/pull that the PUSH position must be OFF and it must be clearly labeled OFF.

I guess he was wrong, but I didn't run that night, I wasn't going to get into a debate with the inspector. He offered to get me refunded so I took him up on it, the night ended up getting rained out anyway.
 
Airgas is pretty big in the Philly area so I'm sure they're in Jersey too....they're a gas supplier and have welding supplies including the cable. Check them out.

For the Fox throttle body, you're going to need to cut the stock connector off your harness and get a fox connector I believe.

Man, if I was still on the east coast, I'd come by and give you hand...this is a huge project.

That is the fox connector next to it :nice:
 
Because I was told I could not run last year with my turn style knob. My 2009 NHRA rule book just came in and I see nowhere that it says push pull required, only that if it is a push/pull that the PUSH position must be OFF and it must be clearly labeled OFF.

I guess he was wrong, but I didn't run that night, I wasn't going to get into a debate with the inspector. He offered to get me refunded so I took him up on it, the night ended up getting rained out anyway.


I know the push/pull switch is good, I was saying that the battery box posted is no legal.