keyless entry on my 95GT

[lazy_stang]

Hey guys I have a 95GT fully loaded that i bought last fall, the keyless remote was working when i put it up for the winter. when i got it out this summer the keyless remote is not working but it still lighting the led up. I want to try re-programming the remote, and i read that the module is on the left side of the trunk once you remove the carpet trim, but i dont see it any wheres. . . i didnt remove the whole carpet tho just pulled it out so i could look. . . how far up is the module and harness towards the front of the car? i have the mach460 stereo, would it be past where the amp is located in the rear?
thanks

 

[HISSIN50]

some pics and help

 

[lazy_stang]

hissin50: thanks, ive read that thread b4, but i dont have that black box like in the pic? unless im not pulling the carpet far enough?? i dunno ill take the carpet right out tomorrow i guess. . .
i wanna remove the drl module as well, but i guess there is probably a thread for that too? i havent searched yet but im about to.

thanks again

 

[maypo59]

Are you sure it's factory keyless? I have had 4 94-95's all with factory keyless, not a one with an "led".

 

[yukisho]

Perhaps the previous owner installed a keyless entry, but located it elsewhere.

 

[lazy_stang]

i dont mean an led on the car but on the remote (keychain) a little red light when you push the lock/unlock/trunk/panic button. . .

 

[D Hook]

i dont mean an led on the car but on the remote (keychain) a little red light when you push the lock/unlock/trunk/panic button. . .

I have one like that but it's aftermarket. The OEM didn't have an led, AFAIK.

Might check the battery in the key fob. It may have enough to light the led but not enough to transmit.

 

[lazy_stang]

well fack, i wonder where the module would be then?

 

[D Hook]

My fob has an led but it's for an aftermarket security system. I found one module behind the glove box and the other (the one with the settings) beneath the removeable bin inside the arm rest. One screw, IIRC.