1low03gt
Dirt-Old 20+Year Member
New Member and New Car
- Thread starter slonlow2000
- Start date
-
Sponsors (?)
- Jul 21, 2009
- 8
- 0
- 1
Thanks a ton guys. I'm uploading pics right now so i'll have them up in a few. All the coil springs on the car are yellow is that helps? I just got back home at around 8 so it was getting to day for some more exterior shots. I'll get it cleaned up after work tomorrow and get some good ones.
Thanks for the help on the wheels.
The deck lid is pretty screwed, they only used fiberglass resin, no glass or anything to fill they holes. They look big enough to have been welded to. So I may look around for a spare deck lid and fix it on the side, then just put it on the car. Are there holes behinds the emblems of these cars?
Thanks for the help on the wheels.
The deck lid is pretty screwed, they only used fiberglass resin, no glass or anything to fill they holes. They look big enough to have been welded to. So I may look around for a spare deck lid and fix it on the side, then just put it on the car. Are there holes behinds the emblems of these cars?
- Jul 21, 2009
- 8
- 0
- 1
Alright, heres some of the suspension.
Front
Rear, only got a little bit of the rear spring, but its yellow.
The exhaust, looks pretty stock to me.
Front
Rear, only got a little bit of the rear spring, but its yellow.
The exhaust, looks pretty stock to me.
- Jul 21, 2009
- 8
- 0
- 1
Heres a few under the hood, I got a couple overall, pretty much the same, then a few of the intake, and a few of the pullies. Let me know if anyone knows the brand of intake. Tomorrow i'll look around a little more on it, and see if I can get to the filter.
Let me know if you guys notice anything out of the oridinary.
Let me know if you guys notice anything out of the oridinary.
- Jul 21, 2009
- 8
- 0
- 1
How about the springs, are they yellow from factory?
One other question, will a deck lid from a vert, fit a coupe?
I'm heading out to start cleanin on it here in a few, buts its raining here, so pics may have to wait til the morning.
One other question, will a deck lid from a vert, fit a coupe?
I'm heading out to start cleanin on it here in a few, buts its raining here, so pics may have to wait til the morning.
stangGT97
New Member
Very nice looking car man. You still have the plastic coolant crossover on your intake manifold, so I suggest picking up the revised intake with aluminum crossover sometime in the near future. The crossover is known to crack so it would be good to have a replacement handy. Check here Ford Racing 4.6L Performance Improvement (PI) Intake Manifold at AmericanMuscle.com - Free Shipping!
Welcome!
Welcome!
- Jul 21, 2009
- 8
- 0
- 1
Thanks, for the answers vee eight.
And thanks for the headup up stangGT97, I've read about that in a few places, but was thinking it was fixex in the 01 year. Guess I miss read somewhere.
What are your guys opinions on exhaust. I've had a few people tellin me a SLP loudmouth 2? Any other bolt on kitsw you guys would recomend? I've been listening to a few on yourtube. But my comp speakers, and a real car are 2 completly things.
And thanks for the headup up stangGT97, I've read about that in a few places, but was thinking it was fixex in the 01 year. Guess I miss read somewhere.
What are your guys opinions on exhaust. I've had a few people tellin me a SLP loudmouth 2? Any other bolt on kitsw you guys would recomend? I've been listening to a few on yourtube. But my comp speakers, and a real car are 2 completly things.
306notchback
Member
Nice car!
Heres of rough vid of mine with Mac Pro Chamber with 2 chamber flowmasters! YouTube - 01 Gt mustang
- Jul 21, 2009
- 8
- 0
- 1
Alright finally cleaned up the car, and took some new pics. Also found out about the springs. Their Max Speed LS-5801's. Google didnt have much, but I fianlly found a few sites with them. Its a 2" front drop, and a 1.8" rear drop.
- Jul 21, 2009
- 8
- 0
- 1
Heres a few of the interior. which looks really good for 9 years old.
Whats a good product to use to keep the leather conditioned, and help avoid cracking?
This pic was a nice little surprise. I seen the foil underneth the edge of the carpet, and peeled it up to find the Fat Mat. most of the truck floor is done, along with the hole for the spare. Its not 100% covered, but still a nice start.
Whats a good product to use to keep the leather conditioned, and help avoid cracking?
This pic was a nice little surprise. I seen the foil underneth the edge of the carpet, and peeled it up to find the Fat Mat. most of the truck floor is done, along with the hole for the spare. Its not 100% covered, but still a nice start.
blackfang
Founding Member
Niterydr85
Member
EPIK
Member
- Jul 21, 2009
- 8
- 0
- 1
Thanks guys, heres a few of the deck lid. Kinda hard to get a pic of the bad paint/body work. But you can see all the sand scratched, and 4 holes from the wing, plus theres one place where the paint bubbled.
These pics make the color look was off, its not that bad in person. Everything else however sucks haha.
These pics make the color look was off, its not that bad in person. Everything else however sucks haha.
Wolvrin704
Member
Yeah, thats a MAC CAI for sure.
Couldn't see most of your midpipe, but if it has 6 cats its stock. If it only has 2 its aftermarket.
- Jul 21, 2009
- 8
- 0
- 1
I only seen 4 cats, from where I was layin on the ground, so its prolly safe to say its all stock, plus I found ford stamped into the mufflers. So I doubt someone would upgrade the mid pipe before the mufflers/catback
I'm selling my mint True Blue wing in a few weeks if you wanted to slap a wing back on to cover the mess.
You bought yourself a nice car there! Congrats.
BurningRubber
10 Year Member
- Dec 6, 2004
- 1,865
- 24
- 58
I was going to say the same thing.
Those are stock pulleys as well, not under-drive pulleys.
Those are the factory mufflers, and from what can be seen that looks like the factory h-pipe.
Similar threads
