I can't direct you to a website, but I can for the most part explain how to do this, I just got done doing it a couple months ago.
You will need a A/C line disconnect tool, which can be had at Autozone or the like for about $10. You will also need to have your A/C system drained by a shop. After that, it just a matter of disconnecting everything. The compressor is on the lower driver side of the accessory bracketing, and it attached by 3 bolts. Just trace all the lines from this and disconnect them using the A/C line disconnect tool. Also, the A/C condensor is located in front of the radiator, so you will have to yank the radiator out if you want to remove it, I don't think it hurts anything to just leave it in the car even if its not hooked up. If you any anymore specific questions or problems, just let me know and I'm sure myself or someone else around here can help you out.
Its a pretty staightforward process, nothing real complicated. Good luck.