bnickel
Founding Member
http://cgi.ebay.com/ebaymotors/1969...DAPTER-69_W0QQitemZ130328087399QQcmdZViewItem
Okay I guess i need something like this item above.
yes, that's what you need
http://cgi.ebay.com/ebaymotors/1969...DAPTER-69_W0QQitemZ130328087399QQcmdZViewItem
Okay I guess i need something like this item above.
We have it. I sent you an e-mail. The 351W adapter is $14.00http://cgi.ebay.com/ebaymotors/1969...DAPTER-69_W0QQitemZ130328087399QQcmdZViewItem
Okay I guess i need something like this item above.
For my 1969, what is involved in colapsing the steering column 2 inches? Are there any irreversable changes that need to be made to the column?
Will it fit (and the pump)fit a big block as well?
Jeff, have you installed this box on a 68 with factory tilt/swingaway steering column? They use a rag joint with a splined end on each side.
My car has factory p/s, I will be replacing all the steering components as the car is getting a "better than new" rebuild/restomod. Could I use manual steering pieces throughout the linkage system to eliminate the drag link adapter, or would I be better off using new p/s pieces. Thanks.
David.
Jeff, have you installed this box on a 68 with factory tilt/swingaway steering column? They use a rag joint with a splined end on each side.
My car has factory p/s, I will be replacing all the steering components as the car is getting a "better than new" rebuild/restomod. Could I use manual steering pieces throughout the linkage system to eliminate the drag link adapter, or would I be better off using new p/s pieces. Thanks.
David.
Complete power conversion kits now available Borgeson Universal Company :: 1965-04 Mustang :: 1965-1970 Mustang Complete Power Conversion Kits
UPDATE:
March 2010 Mustang Monthly Magazine has a Tech write up featuring our new conversion box. "On-The-Road" feedback is slowly trickling in. All customers thus far are pleased with the road feel / response of the new box. Feedback is a little slow hitting the forums but is now starting to.
Few questions if your still around....
1. Looks like you said you can use any pitman arm? I have a powersteering box now so that pitman will be ok to use? Checking because the article I read said use manual steering pitman and idler arm.
2. $50 credit... only on manual steeing boxes?
3. Is there a hose you could supply that fits the 90 mustang power steering pump?
Thanks!