Just an update on the progress. I am very happy with the way things are turning out so far, but still alot to get done before the snow melts and streets are swept.
The 351w engine just after pulling from an old truck
The mustang torn down
Maximum Motorsports k member and flaming river manual rack
The roll cage tached in. I am adding two more bars to my main roll hoop.
My new dash turned out amazing. I have everything I need here. No other gauges to give it a cleaner look.
I am an electrical engineer and my obsession for automotive electronics starts to shine a bit. This is every wire except for the alternator. The entire wire harness to the engine bay fits through the 1" loom along the passanger side firewall
I was able to fit a 4" air filter under the hood! The headlights are black beauty with an HID conversion. I will be able to see a worms ******* in the ditch.
The 351w engine just after pulling from an old truck
The mustang torn down
Maximum Motorsports k member and flaming river manual rack
The roll cage tached in. I am adding two more bars to my main roll hoop.
My new dash turned out amazing. I have everything I need here. No other gauges to give it a cleaner look.
I am an electrical engineer and my obsession for automotive electronics starts to shine a bit. This is every wire except for the alternator. The entire wire harness to the engine bay fits through the 1" loom along the passanger side firewall
I was able to fit a 4" air filter under the hood! The headlights are black beauty with an HID conversion. I will be able to see a worms ******* in the ditch.