WANTED!!!!!! C4 BELLHOUSING THAT WILL FIT A 2.3 TURBO MOTOR

Status
Not open for further replies.
  • Sponsors (?)


74 only?

C4 BELLHOUSING THAT WILL FIT A 2.3 TURBO MOTOR

NAME PRICE, MORE THAN HAPPY TO PAY 4 IT

[email protected]

I have a hollander interchange that lists 2 different 2.3 C4 bells for the mustang II. I am looking for a whole 2.3 C4 mustang II for a holsett HX-35 monster. I have one unconfirmed report of one 1974 2.3 C4 car and i'm trying to confirm the transmission - Still waiting on the seller for data.

i was told 74 pinto and earlier are your best bet... But honestly, I've talked to hundreds about the 2.3 C4 and tracked down 20+ cars and still haven't seen or found or confirmed one in a II.

Good luck.
 
I have a hollander interchange that lists 2 different 2.3 C4 bells for the mustang II. I am looking for a whole 2.3 C4 mustang II for a holsett HX-35 monster. I have one unconfirmed report of one 1974 2.3 C4 car and i'm trying to confirm the transmission - Still waiting on the seller for data.

i was told 74 pinto and earlier are your best bet... But honestly, I've talked to hundreds about the 2.3 C4 and tracked down 20+ cars and still haven't seen or found or confirmed one in a II.

Good luck.

I bought a 1980 Mercury Bobcat several years ago to make a drag car and it had the c-4 in it behind the 2.3. I used the tranny and sold the bellhousing. They must have been in several different models and years.
 
There's a listing on eBay right now:
http://cgi.ebay.com/ebaymotors/2-3-...atic-Mustang-Pinto-C4_W0QQitemZ260545864021QQ

It would really great if the guys at Quicktime Performance would make you one up: Quick Time Performance Products

Some Quicktime bells are SFI approved which eliminates the need for a scatter shield.

They made us up a MII/302 bell for the T-5 and factory MII 141 tooth flywheel, and that's a pretty low demand part.

On a related note...that bell is listed in the clearance section, with 8 units available at $250 each...
 
I have a 164 tooth bell in mine with a windsor,you dont have to go with the pinto or mustang ll bell. you can also get the larger flywheel and plate adapter kit and run the big v8 bell then converter choices are easier and cheaper
 
Status
Not open for further replies.