TONS OF PARTS FOR SALE! WITH PICS!

Status
Not open for further replies.

Black1987Stang

Active Member
Aug 22, 2004
1,422
0
37
Jersey Shore
FRESH 357w...TRW forged pistons, everything has 0 miles on it, never ran

FULLY FORGED 408 stroker...Pending sale

C4 TRANS SETUP...Was told it is a Dynamic Built trans with built internals, TCT Converter, B&M trans cooler with Spal elec. fan and trans temp sender, and Cheetah STS Shifter

World Products Windsor Jr. heads...Was on engine above, NEVER RAN...should be 58cc

Trickflow Twisted Wedge heads with valves only

Eddy Vic Jr heads..less than 1200 miles..TITANIUM Retainers, Anderson Hi-Rev springs, etc...60cc

Roller rockers...2 sets....both are stud mount...both are 1.6 I believe

351w Canton windage tray....like new...

351w steel main girdle with studs...$50

351w Pro Comp Main Studs...Still in box

Long Tube headers for Foxbody 351w swap...1 3/4 primaries, 3 inch collectors, FOUR o2 sensor bungs, FRESH HEAT COATING..has not been run since!

Equal Length Ceramic Coated shorty headers

NEW Stage 2 clutch kit...comes with clutch disk, pressure plate, tob, pilot bearing, and alignment tool...Rated for 380hp...$180!

302 stock oil pan

Trickflow Street heat upper intake

Fel Pro 302/351 head gaskets part number 9333 PT-1 GREAT for boosted engines...still in box

Fel Pro 1262 intake gaskets still in box

65mm throttle body and egr plate

Stock foxbody mustang headers blasted and painted

302 T5 bellhousing

tons of T5 parts

Stock driveshaft from t5 car

Underdash HVAC assembly complete with heater core and a/c evaporator

I have pics of just about everything, let me know your email and I can send em your way!

[email protected]

Sean


CIMG4344.jpg

CIMG4345.jpg

CIMG4349.jpg

CIMG4352.jpg

CIMG4359.jpg

2_5.jpg

2_6.jpg

2_9.jpg

2_2.jpg

2_3.jpg

7-1.jpg

8-1.jpg

CIMG4454.jpg

CIMG1156-1.jpg

CIMG1171-1.jpg

CIMG1173-1.jpg
 
  • Sponsors (?)


Sorry about the late reply..here ya go.......

Vic Jr heads with all parts described above....$1250...Would be Over $1600 to duplicate...less than 1200 miles

Headers are BBK equal length ceramic coated? shorties....made for a 94-95 but was on a 89 notch (just had to plug smog port) so will fit either body styles...Asking $125

No more 7/16 rockers left sorry
 
The shorty headers are pending but price is $125 like in post #7

Eddy Vic Jr heads....I just looked and it looks like the keepers are also Titanium ($135+) along with the retainers ($200++)....$1250...

Windsor Jr heads...$650....ZERO miles

Trickflow TW heads with valves only $550...lots of port work but needs some work left

351w l/t headers....Looking for what I paid for them and I never used them....$300 shipped

T5 parts....I should have 1 90% complete t5 for parts....bunch of other random parts like clips, little balls, shift forks, another t5 case, mainshaft, etc....

I'm honestly not sure if the headers will fit a C4....The guy I got them from told me he used them with his manual transmission so I'm believing his word.

I do still have the 351w windage tray, girdle and studs....

I also do have the stage 2 clutch

Looking for $75 for the subframe connectors, not looking to ship them at the time though.

At this point I'm not looking to seperate the C4 trans, looking for $2k for the complete setup
I'm waiting on my friend with the receipt so I can show everyone all the internal work and prices....

Very sorry for the late replies everyone...I rarely go on here anymore because of work...but feel free to ask me anything more at [email protected]
Thanks
 
Status
Not open for further replies.