Timing and nitrous

[98gtmustang64]

do i have to pull any timing with a 100 shot

 

[Tim2002GT]

If your using the stock tune, you should be ok without retarding timing. I recommend using 93 octane gas though.

 

[98gtmustang64]

ive got 92 in it now thats the highest i can find

 

[BurningRubber]

What would be your method of pulling timing?

I'd pull between 2-4* to be safe with 92 octane (even though it's only a point off), but you would probably be fine without doing so.

You do need 1 step (or 2, but 1 will work on a 100 shot) colder plugs. And I'd use copper plugs. I can't remember if it's platinum or iridium, but one of them has a negative chemical reaction with nitrous.

 

[kuwait]

leave the timing alone and 1-2 range colder triple check its copper plug and you should be good to go , 100 is a small shot

 

[Red35th]

Most people will say you don't need to lower timing at all on a 100. I pulled 2* global from mine though. If you have an easy way to lower timing, I'd rather lose 10hp than be sorry.

 

[98gtmustang64]

im running ngk tr 55s

 

[sweet tooth]

i agree when i ran 100 shot i pulled 3 to 5 out in my 2000 to 4000 rpm range and i run ngk tr6.