trick flow heads which ones to buy so many choices

88GTBlack

New Member
Dec 17, 2009
14
0
2
88 GT MAF conversion car w 3.73s otherwise stock.

For its waiting HCI upgrade, I have track heat upper and lower intakes, 75mm throttle body #24 injectors.

I have everything but the cam, heads, and timing chain.

Stock bottom end car, what heads will work best with my setup without PTV issues. I plan on making most possible power w/ stock bottom end N/A no boost no juice.

5.0L/302, FORD, Trick Flow Specialties - trickflow.com

I was considering the 190cc Track heat heads? what kind of cam?
 
  • Sponsors (?)


what are my options if i run into ptv issues if i do ill be maxxing out budget and end up pulling out the slugs if i could somehow steer clear of ptv issues that would be great
 
i went with AFR 165 heads and trickflow stage 1 cam and streetheat intake am in the process of installing these but from what i heard it should be a very good combo, also i shouldnt have any PTV problems, from what i read you will have to nothch the piston heads to get the clearence, only way to know is check PTV cause its different on each car