Rear spoiler gasket??

[sfcadams]

I am returning my car to stock and that includes re-installing the factory Mustang GT spoiler. Does anyone know the part # for the gaskets for the spoiler? Obviously the original gaskets were stuck to the trunk lid and had to be scraped off upon removing the spoiler. Can anything else be used? I imagine it would have to be sticky to help the spoiler stay on the trunk lid. Any help is appreciated....

 

[Wraith413]

Clear silicone would work just fine.

 

[COBESGT]

You could cut your own out of a sheet of gasket material.

 

[sfcadams]

How would I use the clear silicone? Just put it on the mounting posts where the gasket would have went and just stick it to the trunk and bolt it down?

If I cut my own gasket out of a sheet of gasket material, what would I use to hold the gasket down to the trunk lid? The original gasket was stuck on and had to be scraped off...

 

[SpartaPerformance]

Double sided tape, that's basically what the factory uses.

 

[Wind-Farmer]

If you cant see any epoxy/tape, and it wont rust, and the spoiler stays on...then it's perfect.