.. check it outtt....... tomorrow im gonna mount them and take a BFH and wackk my inner fender some...... these tires look ALOT bigger in person then they do in the pics.... they are EFFING huge!! ugh i hope its not gonna be a HUGE PITA
close..... they are 335/30/18.......... ive did some research of people who done it on an sn95, and i see that the quads gotta come out and a hammer to the inner fender and i should be fine.... i guess ill see what i need to do once i mount the tires and put them on.... sooo im gonna do thast now.... ill keep yas updated.... thanks..
ok sooo try and explain this to me.... bc either somethings missing... or god just loves me...
tires were mounted....... i got my tools ready and the BFH..... and i mounted the rims.... THEY FIT!! quadshocks are still there..... i lowered the car and i have a half inch clearance between the inne fender and the tire...... thats right..... NO WORK AT ALL BUT MOUNTING THE WHEELS!! WTF?? I took it for a ride.... around turns and bumps.... no rubbing at all!!
the pics were taken from my phone... ill get better ones later
put a couple friends in the back seat and try to go over a speed bump at a decent speed. if they still don't hit, then you should kick in a few extra dollars in the collection plate on sunday
lol soo i took an hour cruise... over speedbumps.... them slow bumps etc.. no rubbage.... and dont worry.. if i HAD to use spacers, i would use them hubcentric ones.... but in my situation no because then my tires will be 10 feet past my fenders.... there fine now....
as far as passengers.... i dont know... and i dont like people in my back seat lol.....
i have about a half inch from my tires to the quads.... and about an inch to my whole inner fender..... im not gonna do 60 mph sharp turns and TRY to get it to rub, but normally driving their fine..
they are 335/30/18 on an 18x10 inch wheel... i know the wheel SHOULD be wider... but i found a thread on corral with people with 10 inch wheels to confirm if itll be ok or not..... then i bought them..... i think they look sweet but thats my opinion.. everyones got one..
hmm okk soo i think i know why they might not rub... i took a measuring tape to them and they were 12 inches...... yesterday when i measured them off the wheels, they were 13.5 inches wide..... i guess that explains the inch gap i have..... i was better off getting 315s i guess..... whatever... for 150 a tire, i couldnt beat it
well ide be willing to bet my 335s is exactly the same or near close to your 315s just bc of how small my wheels are....
and my car does rub..... when i turn the fender gap closes and skims my tire on the top of the outer fender...... either i need new shocks... they are very "soft".. i gotta check it out.,.... orrr roll my fenders...