Quick 5 lug question

[90notch_5.0]

I have the SN95 rear brackets, calipers, soft lines, and hard lines. My question is since I have the fox length five lug axles how can I make the brackets work? I remember I found a really good link on how they cut the bracket and slap it behind the diff but I can’t find it. Can someone tell me on how to do the swap or post the link?

P.S. I already have the master cylinder, PV, and booster so I am just stuck with the rear end.

 

[NIKwoaC]

I remember that link, but I went with North Race Car brackets, so I can't help you with the mod, really. IIRC though, you could probably figure it out just by mocking everything up, and cutting out the least amount of material as necessary.

 

[89drop]

im pretty sure this is what youre looking for, let me know...

my5oh - View topic - SN95 Cobra rear brakes and Fox length axles

 

[90notch_5.0]

im pretty sure this is what youre looking for, let me know...

my5oh - View topic - SN95 Cobra rear brakes and Fox length axles

Tham man i owe you a beer a nice cold one! I was looking for that link for like 2 weeks.

 

[89drop]

Tham man i owe you a beer a nice cold one! I was looking for that link for like 2 weeks.

sounds good, glad i could help...im in the middle of my 5 lug conversion too so i have most of this stuff saved in my bookmarks...

 

[90notch_5.0]

sounds good, glad i could help...im in the middle of my 5 lug conversion too so i have most of this stuff saved in my bookmarks...

Good luck with the swap. If its possible can i get the links or all the info on the 5 lug so i can save it on my computer? Thanks

 

[Mustang5L5]

Also this one

Brake guys, critique this: ranger axles on rear disk swap, w/modified SN brackets - Page 4 - Corral.net : Ford Mustang Forums

 

[89drop]

pm sent.
Mike, am i ok to use the plates and just bolt them up the way they came off if im just using the 98 sn95 axles? also, im reading that i need more adapters for the soft to hard lines for the rear as well? got the proper fitting for the front today Thanks for your help with that!)

 

[Mustang5L5]

If you have 94-98 axles, just bolt it up the way ford did it on the sn95. No mods needed.

The adapters for the rear are weatherhead 7818

 

[89drop]

If you have 94-98 axles, just bolt it up the way ford did it on the sn95. No mods needed.

The adapters for the rear are weatherhead 7818

thanks again Mike! i think i owe you a keg party for all your help! and i need one for each side i assume?

 

[Mustang5L5]

Yup, then you'll need to carefully curl the fox brake line in a loop to connect to the 94-95 soft line brackets

 

[89drop]

Yup, then you'll need to carefully curl the fox brake line in a loop to connect to the 94-95 soft line brackets

ok, any idea where i can see a pic of this, havent came across this one yet...

 

[90notch_5.0]

Also this one

Brake guys, critique this: ranger axles on rear disk swap, w/modified SN brackets - Page 4 - Corral.net : Ford Mustang Forums

pm sent.
Mike, am i ok to use the plates and just bolt them up the way they came off if im just using the 98 sn95 axles? also, im reading that i need more adapters for the soft to hard lines for the rear as well? got the proper fitting for the front today Thanks for your help with that!)

Thanks you guys are the bomb!!
:SNSign:

 

[89drop]

If you have 94-98 axles, just bolt it up the way ford did it on the sn95. No mods needed.

The adapters for the rear are weatherhead 7818

is there just a bolt on brake line that i can get for this? i dont really wanna mess up my lines curling them in a loop?