engine question
- Thread starter oldno7
- Start date
-
Sponsors (?)
its not much ......cobra intake, gt 40 heads, different cam a little better than stock, slight raise in compression, 24lb injectors, crane 1.7 rockers (pedestal), 70mm mass air, 65mm throttle body, a better exaust, and a better trans T5Z
Wildstringer
New Member
- Feb 20, 2011
- 65
- 0
- 0
No.11
10 Year Member
No.11
10 Year Member
its just a stinkin gardener snake. it doesn't intimidate people. i got a friend that's good at reading the manual and he always talks trash and won't back it up. we were at a party and he kept sayin its a cobra you can't touch this and you see that snake that gives it 280 hp its a 99 by the way. After about five minutes of this my girlfriend interrupts him and says you mean that gardener snake on the front. it was hysterical and he shut up the rest of the night.
Not to be a jerk, but nobody likes a Fobra. And its not like the cobras were much faster than the GT/LX cars, and from the looks of it you still have E7s anyways
i was looking at getting these things from mustang unlimited in a month. will this be a good set up.
Afr 1420 heads
xtreme energy hydraulic cam cc3518
PRO MAGNUM ROLLER LIFTER RETROFIT cc8931
TIMING SET HI-TECH DOUBLE ROLLER cc3138
ROLLER ROCKER SET ULTRA PRO 3/8" 1.6 cc1631
you think this set up. will this work with a 347 stroker and my setup already. is there someting that i might be missing.
Afr 1420 heads
xtreme energy hydraulic cam cc3518
PRO MAGNUM ROLLER LIFTER RETROFIT cc8931
TIMING SET HI-TECH DOUBLE ROLLER cc3138
ROLLER ROCKER SET ULTRA PRO 3/8" 1.6 cc1631
you think this set up. will this work with a 347 stroker and my setup already. is there someting that i might be missing.
Similar threads
