Put this on yesturday

[SMOKEDYA]

Got my catch can set up from summit installed yesturday,but i had to take to take the valve covers back off cause the bulk head fittings wouldnt stay tight,so they are getting tig welded on.And i tig welded the other fitting on the other side of the can cause it only came with one.Heres some pics. peace

john

 

[BlownRed5oh]

looks nice! what size is the turbo?

 

[GroverDill]

I need to do welded fittings too, the hoses look good, I cheaped out and used rubber lines for now.

 

[SteedaGT9150]

that engine bay is straight tits

 

[LarsD]

That bay is really sanitary.

 

[SMOKEDYA]

looks nice! what size is the turbo?

76mm

I need to do welded fittings too, the hoses look good, I cheaped out and used rubber lines for now.

Well yeah with almost $100 in just hose i hear ya!

that engine bay is straight tits

That bay is really sanitary.

Thanks guys!Wouldnt have it any other way! peace







john

 

[Cobra912]

Looks good.

I just did the same thing last night. Had two -12AN bungs welded to my valve covers, bought two summit 90 degree AN fittings for 16 bucks each (nice fittings), 6 feet of russell proflex braided hose for $50 (more than enough hose), a moroso tank with two 12AN bungs for $95 and two mr. gasket shadow series 45 degree fittings for 12 bucks each (on sale, reg $30 each).

I'm into into it about $250

 

[SMOKEDYA]

Looks good.

I just did the same thing last night. Had two -12AN bungs welded to my valve covers, bought two summit 90 degree AN fittings for 16 bucks each (nice fittings), 6 feet of russell proflex braided hose for $50 (more than enough hose), a moroso tank with two 12AN bungs for $95 and two mr. gasket shadow series 45 degree fittings for 12 bucks each (on sale, reg $30 each).

I'm into into it about $250

I used the exact same stuff almost just more hose didnt wana wait on the 6' to come back in stock.Did you get the 15.5"L can?peace







john

 

[Cobra912]

yeah it's pretty long, looks pretty decent though, I bought it because 1991vert had the exact same can

 

[NIKwoaC]

Looks real good, love the black. What turbo setup is that?

 

[SteedaGT9150]

Looks real good, love the black. What turbo setup is that?

iirc its the on3 setupd

 

[srtthis]

looks good man... we are running 2 of them on the race car to try and stop oil blow out of filter when we shut the car down at 9000

 

[Grn92LX]

I have a dual inlet vented breather tank like that on mine. I did it the quick/cheap way and used 5/8" heater hose. I mounted mine inside the passengers side fender where the air silencer would have been with the factory air box. Out of site.