For Sale: AFR 165's, Ported Performer, FTI Cam, Etc.

Status
Not open for further replies.

5spd GT

"the 5.0 owns all"
Founding Member
Aug 7, 2002
9,516
4
79
Arkansas
*New Lower Prices*

I am selling an AFR 165, Ported Edelbrock Performer Intake, FTI camshaft combination (or separately) all designed by Ed Curtis @ FTI. All of it came out of a running engine off a daily driver. I am going with a new combination from Ed, so I need to sell.

All parts have ~50K on them. These were on a daily driver. It was designed for 2600-5600 RPM powerband. I ran 87.33 MPH (~110 MPH in the ¼ mile) in the 1/8th mile with a 3,400 lb race weight with T5 ’93 5.0L. It was never tuned, just bolted on.

AFR 165’s (1402’s) – Upgraded ARP 7/16” studs, 11/32’s valve stems, FTI Upgraded Springs, 58cc combustion chamber, viton seal upgrade. They have been cleaned and seal checked. One exhaust header thread is larger (larger bolt supplied). I am including used Stage 8 Locking Header Bolts (without locking washers) with the heads.

Asking $850 SHIPPED.

Ported Edelbrock Performer EFI Intake – Ported by Tom Moss for AFR 165’s. Lower has been bead-blasted. The thermostat thread holes are cross threaded, but they seal. There is a little cosmetic flaking on the bottom of the upper intake from the finish. The back right ear has been re-welded on after I broke an ear off. It has been like that for ~50,000 miles with numerous replacements and reinstalls of the upper intake – it is not an issue. The purchaser will get the intake bolts and the hardware to install it.

Asking $340 SHIPPED.

FTI Camshaft – Designed by Ed Curtis @ FTI. Powerband is 2600-5600 RPM. A .560”/.556”, 224*/224* (280*/274*) duration with a 111 LSA. Designed for a stock 302 shortblock (untouched pistons) with the AFR 165’s and Performer Intake. There is very slight surface rust, but you cannot feel it with your fingers.

Asking $115 SHIPPED.

Engine Works Hardened Pushrods 6.2500” for the above combination - $20 SHIPPED.

Used Rollmaster Timing Chain - $20 SHIPPED.

Used HR Eaton Lifters from FTI - $30 SHIPPED.

I also can sell all of these parts as a combo for $1275 SHIPPED.

For pictures (my gallery): http://forums.corral.net/photopost/showgallery.php?ppuser=107137&cat=500

Looking for serious buyers. Once payment is received (cashier’s check), the parts will be shipped immediately with a tracking number via UPS. Cash is fine for items under $50. These parts will be shipped USPS.

Thanks.
 
  • Sponsors (?)


Status
Not open for further replies.