19 or 24# injectors for gt40 build

[rdharper02]

Heres the basic layout. I have built a motor using gt40p heads an an explorer intake. With the exception of some porting and polishing the motor is factory refresh. I have a pmass air meter and 24lb injectors laying around and planned on using them. Is that too much injector or can I get away with it? Anyone run a similar set-up?

 

[Mustang5L5]

1993 cobras came with 24# injectors and virtually the same setup

 

[f8tlfiveo]

I have basically the same thing but I have a 70mm mass air from 94-95 mustang.. The mass air meter peggs out at 5000rpm and the 19 lb injectors are at their max but still working.. If you have the proper stuff to run 24lb injectors I would..

 

[rdharper02]

Good point. I was hoping to hear that. I have an unused C&L that I could have bought another cal tube for, but really wanted to stay with the pmass system. Thanks for the reply.

 

[f8tlfiveo]

Take that c&l and put it on eBay..

 

[Butterfinger]

The 24s were a slight overkill on the 93' Cobras. If you got them though, use em', just don't expect better performance or more power.

 

[donsbad68]

I'd run the 24lb units.