Hi,
Been beating on my `67 Fastback to get a few problems fixed:
1. Swap front wiring harness (fried at radiator support, no charging)
2. sfe20 (bottom) fuse blowing
3. Blinkers slow, brake light a lil late, etc.
1. I have swapped the front harness with all lights, horn, etc. working. I do have a connector that has no wires in the dash, where the previous harness was connected. After tracing the wires, one leads to the starter solenoid, the other to ground. Any ideas what it could be? It is a yellow plug with a solid yellow (ground) and solid red (solenoid.)
2. I have NO idea why this fuse is blowing...I was hoping it was related to the wiring harness, but didn't fix the problem. I have tried a fresh fuse with the turn signal harness disconnected, the light switch disconnected, radio disconnected, and of course with the front harness disconnected. Any ideas where I could look next? The dash wiring harness looks good and has no other problems otherwise. Ideas? The fuse blows immediately after inserting a new fuse. All lights, etc. work, just trying to get the harzards working properly.
3. All working great with the new wiring harness and a new flasher.
Thanks for any ideas!
Andy
Been beating on my `67 Fastback to get a few problems fixed:
1. Swap front wiring harness (fried at radiator support, no charging)
2. sfe20 (bottom) fuse blowing
3. Blinkers slow, brake light a lil late, etc.
1. I have swapped the front harness with all lights, horn, etc. working. I do have a connector that has no wires in the dash, where the previous harness was connected. After tracing the wires, one leads to the starter solenoid, the other to ground. Any ideas what it could be? It is a yellow plug with a solid yellow (ground) and solid red (solenoid.)
2. I have NO idea why this fuse is blowing...I was hoping it was related to the wiring harness, but didn't fix the problem. I have tried a fresh fuse with the turn signal harness disconnected, the light switch disconnected, radio disconnected, and of course with the front harness disconnected. Any ideas where I could look next? The dash wiring harness looks good and has no other problems otherwise. Ideas? The fuse blows immediately after inserting a new fuse. All lights, etc. work, just trying to get the harzards working properly.
3. All working great with the new wiring harness and a new flasher.
Thanks for any ideas!
Andy