Hey everybody, picked up a nitrous kit on here for 200 bucks but its missing a couple parts. Its a nos kit with NX solenoids and a purge kit. Here is my first dilemma is the wiring size. To the noids what gauge should I be using? I have read everything from 12 to like 16. What about for the switches? I have heard like 18 but I am not sure! My other question involves what jets to get 100 and 125 rwhp shots. Its a nos nozzle and I have heard that on their shots they are flywheel hp but there has to be a way to get their rwhp number. I am gonna run a 100 rwhp shot then pick up a aviator pump, tune and plugs to run a 125 shot!
Need some Nitrous Gurus!
- Thread starter FlMuPhi198
- Start date
-
Sponsors (?)
Stumbaugh
Member
I belive I did 14 gauge for everything on my nitrous kit, switches and all.
If NOS or whoever rates their kits at flywheel and you are wanting a 100rwhp shot, then jet it for a 125 flywheel shot.
If NOS or whoever rates their kits at flywheel and you are wanting a 100rwhp shot, then jet it for a 125 flywheel shot.
LRSjmac
Premium Sponsor
14 gauge wire will be your best bet; I use it to install everything in the system. Keeps it simple!
Start out with a .051 Nitrous & a .034 Fuel for a 100 shot & .065 Nitrous & .038 Fuel for a 125. Keep in mind jetting estimates are just that. Depending on A/F ratio & how your plugs read, a fuel jet adjustment may be needed. These estimate are on the safe side & will get you started in the right direction!
Regardless of shot size, I'd recommend at least running NGK TR6 gapped at .035". The fuel pump is definately a good idea, & if your existing one is suspect, I wouldn't recommend spraying until you get it swapped out.
Similar threads
