Okay, I have a 97 cobra and I've already started a new thread but I think I found an issue with my cycling switch. Does anybody else have three wires running into the plug that inserts into the low side switch on the drier? Not only do I have three wires into the plug but the plug has 4 holes and the switch only has 2 pins. How does this work? The 3 wires running into the plug are Red-13.7V, Purple, 5.12V, and Black/white 0v (ground?). The purple 5.12V wire is the hole one of the pins on the switch plugs into. the second of the two pins in the switch plugs into the hole in the plug that has no wire in it. My ac will not cycle when putting 12V onto the purple wire. The AC will turn on if I jump 12V to the blue/yellow wire in the pressure switch near the radiator. I am stumped an so is every freakin shop I take the car to. Please, please, please somebody help me out...