power steering conversion on 68

[dapenberthy]

will a Power steering linkage, control valve and steering box from a 1970 mustang wotk on a 68?

 

[2+2GT]

Yes, the 68-70 were the same in that regard. Some other parts were different. You will need 68 outer tie rod ends, for example

 

[68dustin]

i used a 69 box, control valve, pump in my 67 cougar

 

[skywalker]

Unless you are specifically shooting for originality, if I were going from manual to power I'd spend the extra bucks and go burgeon or r&p otherwise I'd just leave it as is. Manual on these cars isn't that bad and the stock PS is pretty sloppy.

 

[lord_cobra]

Unless you are specifically shooting for originality, if I were going from manual to power I'd spend the extra bucks and go burgeon or r&p otherwise I'd just leave it as is. Manual on these cars isn't that bad and the stock PS is pretty sloppy.

I agree. For the money I put into my stock '69 Power steering I almost could have went with Burgeonson and had a lot better feeling steering.

 

[skywalker]

I agree. For the money I put into my stock '69 Power steering I almost could have went with Burgeonson and had a lot better feeling steering.

My '68 was manual. My '66 is stock power. The only knock I had on my '68's steering was that the steering box was noticeably work. Put a flaming river box in and that went away...and then it was stolen a few months later.