35th Anniv How to make your hardtop 35th into a convertible!

6T9_CHARGER_RT

New Member
Sep 15, 2007
125
0
0
S.I.N.Y.
In a few easy steps :rlaugh:

Won a hardtop Performance Red 1:18 off ebay for a decent price...$12!
The convertibles are pretty hard to find so...I made my own:D
download_1.jpg


I also bought a "base" red 99 'vert a while back new in the box. Looking at the hard top, it looked like most of the convertible stuff would fit but how to get rid of the hardtop roof?
5_16_2011_7_32_17_PM_0043_resize.jpg

taking the car apart revealed that the roof was molded separately and was rivited onto the body.
5_16_2011_7_32_43_PM_0045_resize.jpg


Removing the roof revealed some raw diecast metal that just needed some Performance Red touch up paint...the convertible boot goes "inside" the car & doesnt cover this area
5_16_2011_7_37_36_PM_0052_resize.jpg


You also need to remove the windshield assy from the donor car (its all plastic including the pillar posts....which also need touch up paint to match)
5_16_2011_7_32_05_PM_0042_resize.jpg


Heres the interior & chassis waiting for the roofless body...
5_16_2011_7_33_14_PM_0048_resize.jpg



Screwed it all back together & viola .... A convertible 35th Anniversary LE 1:18th

5_16_2011_8_44_51_PM_0056_resize.jpg


5_16_2011_8_45_07_PM_0057_resize.jpg
 
  • Sponsors (?)


You need to take the rear axle set up off first (2 screws)

In rear wheel wells there is 1 screw on each side (visible when you take rear axle assy off)

There is 1 more screw hidden under the trans assy...the trans case & exhaust assy seperate to reveal the screw

Front susp does not have to come off....

Good luck!