C CaspersFoxes New Member Apr 11, 2011 29 0 1 South Carolina Oct 31, 2011 #1 Oct 31, 2011 #1 I talked to a guy about buying a motor he said was dynoed for 340hp at the rear wheels, it's got 24lb injectors, aluminum edelbrock heads, the ford f303 cam, and 1.7 ratio rockers. are there any issues with the 1.7 rockers on the f303 cam?
I talked to a guy about buying a motor he said was dynoed for 340hp at the rear wheels, it's got 24lb injectors, aluminum edelbrock heads, the ford f303 cam, and 1.7 ratio rockers. are there any issues with the 1.7 rockers on the f303 cam?
R reldla1996 Member May 4, 2011 356 22 19 Dayton, Ohio Oct 31, 2011 #2 Oct 31, 2011 #2 Assuming you have no issues with piston to valve clearance, you're good to go. The cam doesn't care what ratio the rockers are.
Assuming you have no issues with piston to valve clearance, you're good to go. The cam doesn't care what ratio the rockers are.
Rick 91GT Mustang Master Nov 29, 1999 9,692 95 99 PA Nov 1, 2011 #3 Nov 1, 2011 #3 The f cam will not care about the 1.7 rocker... Whats done to the bottom end? What edelbrock heads?
C CaspersFoxes New Member Apr 11, 2011 29 0 1 South Carolina Nov 1, 2011 #4 Nov 1, 2011 #4 Rick 91GT said: The f cam will not care about the 1.7 rocker... Whats done to the bottom end? What edelbrock heads? Click to expand... it's the stock bottom end, but the piston tops have been "cut for bigger valves" and i believe he said they were the performers
Rick 91GT said: The f cam will not care about the 1.7 rocker... Whats done to the bottom end? What edelbrock heads? Click to expand... it's the stock bottom end, but the piston tops have been "cut for bigger valves" and i believe he said they were the performers
Rick 91GT Mustang Master Nov 29, 1999 9,692 95 99 PA Nov 2, 2011 #5 Nov 2, 2011 #5 Just verify piston to valve clearance, you may only have a 1.94" intake so you would only a little deeper relief to fit the cam with 1.7's. Shoot for .080" intake and .100" exh
Just verify piston to valve clearance, you may only have a 1.94" intake so you would only a little deeper relief to fit the cam with 1.7's. Shoot for .080" intake and .100" exh
P pikapp33 New Member Sep 2, 2004 6 0 0 Peoria, IL Nov 2, 2011 #6 Nov 2, 2011 #6 I've got 1.7's on my F303 with stock bottom, no issues. I did have to get a different length pushrod though for correct alignment.
I've got 1.7's on my F303 with stock bottom, no issues. I did have to get a different length pushrod though for correct alignment.
